Abstract:In this work we have synthesized Mn doped GdFeO3 nano-particles using a green and facile sol gel method and studied their photocatalytic, optical, vibrational and electrical properties. The Rietveld refinement of the XRD profiles suggests that all the materials have an orthorhombic Pbnm crystal structure. The transmission electron microscope (TEM) images show the decrease of the average particle size from 140 to 80 nm with the Mn concentration. The high crystallinity of the synthesized particles is confirmed from the HR-TEM images. Raman spectrum is employed to investigate the phonon modes of the materials. The optical band gap of the materials is obtained from the UV-vis reflectance spectroscopy (DRS) using Tauc relation which indicates the reduction of the band gap from 2.18 to 1.72 eV with Mn-doping. The photocatalytic activity of the materials is studied by the photocatalytic degradation of rhodamine B (Rh-B) in aqueous solution under visible light illumination. The substitution of Mn at the Fe site introduces an extra electronic state between the conduction band and the valence band which reduces the electronic band gap and enhances the Rh-B degradation efficiency. A 30% Mn doping at the Fe site (GFMO3) provides an optimum space charge width which assists to attain the maximum rate of degradation of the Rh-B dye. The doping of Mn3+ reduces the photogenerated electron and hole recombination rate and hence more charge carriers take part in the redox reaction which facilitates the photo-catalytic efficiency in GFMO3. The degradation rate enhances by a factor of 2.5 for GFMO3 as compared to pure GdFeO3. The highest photocurrent density of 1.31 μA cm-2 of GFMO3 with respect to other materials promotes the separation and transfer of the photo generated charge carriers. The possible photocatalytic mechanism of the Mn doped GdFeO3 is also critically discussed. Alternating current impedance spectroscopy is used to study the electrical properties of the synthesized materials. The increase in the conductivity with the Mn concentration is explained on the basis of the band gap reduction and this is consistent with the Smit and Wijn theory. Magnetic measurement is performed to measure the magnetization strength which is useful to separate the photocatalyst by simply using a magnet. The temperature dependent magnetization measurement suggests the anti-ferromagnetic (AFM) behaviour of the studied materials with the decrease of Néel temperature (TN) with Mn concentration. The XPS study reveals the presence of multiple oxidation states of Fe(2+/3+) and Mn(4+/3+) in these materials which facilitates the conductivity as well as the oxidation/reduction efficiency at the surface of the catalyst. The band gap reduction and its effect on the enhancement of the photocatalytic degradation efficiency with Mn doping are also discussed from the density of states calculations. Thus, this study describes a promising approach for the organic pollutant degradation by designing an efficient and stable perovskite photocatalyst.

Solid-state synthesis of La0.75Gd0.25FeO3 nanoparticles for the enhanced photodegradation of methylene blue under sunlight irradiation

Synthesis and characterization of mixed oxides derived from lanthanum orthoferrite perovskite: exploring morphological, spectroscopic, and photocatalytic properties

Efficient and rapid sunlight-driven photocatalytic degradation of methylene blue dye using multiferroic BiFeO3 nanoparticles

Quasi-polymeric construction of stable perovskite-type LaFeO3/g-C3N4 heterostructured photocatalyst for improved Z-scheme photocatalytic activity via solid p-n heterojunction interfacial effect.

Chelating agent assisted BiFeO3 nanostructured material for visible light induced photocatalytic degradation of methylene blue dye

Preparation, Characterization and Optical Property of LaFeO3 Nanoparticles via Sol-Gel Combustion Method

Photocatalytic degradation of bromothymol blue over MgFe2O4 under sunlight exposure

Synthesis of novel Bi0.5Na0.5Ti0.95 (Ni0.2Fe0.2Sb0.6)0.05O3 perovskite material used as a photocatalyst for methylene blue degradation under sunlight irradiation

Facile Synthesis of BiFeO3 Nanoparticles by Modified Microwave-Assisted Hydrothermal Method As Visible Light Driven Photocatalysts

Solar-light-driven LaFe x Ni 1− x O 3 perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants

Effect of Mg Doping on the Physical Properties of Fe2O3 Thin Films for Photocatalytic Devices

Biogenic synthesis of LaMnO3 perovskite nanoparticles: enhanced photocatalytic activity for water purification

Enhanced Performance of La<sub>0.8</sub>Sr<sub>0.2</sub>FeO<sub>3-</sub>-Gd<sub>0.2</sub>Ce<sub >0.8</sub>O<sub>2-</sub> Cathode for Solid Oxide Fuel Cells by Surface Modification with BaCO<sub>3</sub> Nanoparticles

In-depth study of the photocatalytic performance of novel magnetic catalysts for efficient photocatalytic degradation of the dye orange G

Plant extract mediated synthesis of BiFeO3 nanoparticles for photocatalytic degradation of methylene blue dye

Sonochemical synthesis of nanocrystalline LaFeO3

Enhanced photocatalytic activity, transport properties and electronic structure of Mn doped GdFeO3 synthesized using the sol-gel process

Modification of the Electronic Structure and Surface State of LaFeO3 for Improved Visible Light Photoelectrochemical Water Oxidation

Synthesis And Electrical Properties Of La0.6m0.4feo3-Delta (M=Ca, Sr, Ba) As Cathodes For Sofcs

Bismuth-doped lanthanum ferrite perovskites: A promising approach for enhancing photo-Fenton degradation of organic dye pollutants

Photocatalytic activity of graphene-loaded LaFe1-xCuxO3 for organic pollutants removal