Abstract:LiNi0.8Co0.1Mn0.1O2 (LNCMO) cathode materials for lithium-ion batteries (LIBs) were prepared by the hydrothermal synthesis of precursors and high-temperature calcination. The effect of precursor hydrothermal synthesis temperature on the microstructures and electrochemical cycling performances of the Ni-rich LNCMO cathode materials were investigated by SEM, XRD, XPS and electrochemical tests. The results showed that the cathode material prepared using the precursor synthesized at a hydrothermal temperature of 220 °C exhibited the best charge/discharge cycle stability, whose specific capacity retention rate reached 81.94% after 50 cycles. Such enhanced cyclic stability of LNCMO was directly related to the small grain size, high crystallinity and structural stability inherited from the precursor obtained at 220 °C.

What problem does this paper attempt to address?

The problem this paper attempts to address is improving the electrochemical stability of the nickel-rich LiNi0.8Co0.1Mn0.1O2 (LNCMO) cathode material in lithium-ion batteries. Specifically, the authors optimize the microstructure and electrochemical cycling performance of LNCMO cathode material by adjusting the precursor hydrothermal synthesis temperature. ### Background - **Lithium-ion batteries (LIBs)**: Due to their high energy density, high operating voltage, and environmental friendliness, lithium-ion batteries are widely used in electric vehicles, portable devices, and energy storage systems. - **Layered ternary cathode materials**: LiNi1-x-yCoxMnyO2 combines the high structural stability of LiCoO2, the high capacity of LiNiO2, and the low cost of LiMnO2, becoming a research hotspot. - **Nickel-rich LNCMO**: Theoretical capacity is as high as 280 mAh/g, but due to high energy barriers, Ni2+ is difficult to oxidize to Ni3+/Ni4+, resulting in residual Ni2+ during high-temperature calcination. This can lead to cation mixing and layered structure destruction, thereby affecting cycling stability and rate performance. ### Research Methods - **Precursor hydrothermal synthesis**: Synthesize pinecone-like precursors through the hydrothermal method, then mix with a lithium source (Li2CO3) and perform high-temperature calcination to prepare LNCMO cathode material. - **Different hydrothermal temperatures**: Conduct hydrothermal reactions at 160°C, 180°C, 200°C, 220°C, and 240°C, respectively, to study the effects of different temperatures on the precursor and final LNCMO material. ### Main Results - **XRD analysis**: XRD patterns of all precursors only show diffraction peaks of NiCO3, indicating high purity of the precursors. - **Elemental composition**: ICP-AES test results show that the molar ratios of Ni, Co, and Mn in the precursors vary at different hydrothermal temperatures. - **Morphology observation**: SEM images show that the particle size and morphology of the precursors vary at different hydrothermal temperatures, with the smallest particle size and uniform grain size at 220°C. - **Electrochemical performance**: The LNCMO cathode material prepared from the precursor synthesized at a hydrothermal temperature of 220°C exhibits the best charge-discharge cycling stability, with a capacity retention rate of 81.94% after 50 cycles. ### Conclusion - **Optimal hydrothermal temperature**: 220°C is the optimal hydrothermal synthesis temperature, capable of obtaining precursors with small particle size, high crystallinity, and structural stability, thereby significantly improving the electrochemical performance of LNCMO cathode material. - **Application prospects**: The optimized LNCMO cathode material has good cycling stability and high capacity, promising for use in high-performance lithium-ion batteries. By adjusting the precursor hydrothermal synthesis temperature, this study successfully improved the electrochemical stability of LNCMO cathode material, providing new insights for the development of high-performance lithium-ion batteries.

Enhancing the Electrochemical Stability of LiNi0.8Co0.1Mn0.1O2 Compounds for Lithium-Ion Batteries via Tailoring Precursors Synthesis Temperatures

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Effect of High-Temperature Crystallization on the Electrochemical Properties of LiNi0.5Co0.2Mn0.3O2 Synthesized from a Lithiated Transition Metal Oxide Precursor

Low-temperature strategy to synthesize single-crystal LiNi0.8Co0.1Mn0.1O2 with enhanced cycling performances as cathode material for lithium-ion batteries

Study on the Effect of the Pre-treatment Temperature on Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material

Investigation on LiNi0.5Mn1.5O4 cathode material based on the precursor of nickel-manganese compound for lithium-ion battery

Enhancing the High-Voltage Electrochemical Performance of the LiNi0.5Co0.2Mn0.3O2 Cathode Materials Via Hydrothermal Lithiation

Temperature-controlled direct dry synthesis of Co-Ni free cathode materials 0.7Li2MnO3·0.3LiFeO2 for lithium-ion batteries

Effects of Precursor Heat-treated Temperature on LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 Materials

Structural evolution and formation mechanism of LiNi0.6Co0.2Mn0.2O2 during high-temperature solid-state synthesis

Hydrothermal Synthesis and Electrochemical Performance of LiNi<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>2</sub> as Lithium-Ion Battery Cathode

Preparation and electrochemical performance of LiNi0.5Mn1.5O4 spinels with different particle sizes and surface orientations as cathode materials for lithium-ion battery

Synthesis and Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2 Via an Original Wet-Chemical Route for High Voltage Li-ion Batteries

Synthesis and Electrochemical Characterization of LiNi0.5Co0.2Mn0.3O2 Cathode Material by Solid-Phase Reaction

Enhanced high-temperature cycling stability of LiNi1/3Co1/3Mn1/3O2-coated LiMn2O4 as cathode material for lithium ion batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode for Lithium-Ion Batteries by Precursor Preoxidation

Structural, electrochemical and cycling properties of Nb5+ doped LiNi0.8Co0.1Mn0.1O2 cathode materials at different calcination temperatures for lithium-ion batteries

Monitoring the morphology evolution of LiNi0.8Mn0.1Co0.1O2 during high-temperature solid state synthesis via in situ SEM

Hydrothermal Synthesis and Electrochemical Performance of Micro-spherical LiNi1/3Co1/3Mn1/3O2 Cathode Material

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Materials Obtained by Atomization Co-Precipitation Method