Abstract:Abstract Per recent analyses, in the near future, over half amount of the oil extracted globally, will require some form of enhanced oil recovery (EOR) techniques. Existing literature and historical investigations suggest that in oil reservoirs having viscosities between 10 – 150 m.Pa.s, there is a significant potential for tertiary recovery through the application of polymer flooding. For reservoir oil viscosities above 150 mPa.s, the polymer pumping efficiency goes down as polymer injectivity reduces significantly with increasing injection water viscosity that are used to attain a favorable mobility ratio at such high oil viscosities. To overcome this limiting factor, in this study, we propose the use of supramolecular assemblies (SMA) that have adjustable viscosity properties. Complexation of long-chain amino-amides and maleic acid is used to make these assemblies, which allow it to have reversible viscosity depending on the solution pH level. To maintain high injection efficiency, during pumping, SMA solutions will be kept at low viscosity values. On entry in deep reservoir or at oil contact phase, through introduction of an external stimulus the viscosity of SMA solution will be reversed to a much higher viscosity. This will allow to sufficiently improve the mobility ratio. Preliminary results from lab-scale studies have indicated that along with reversibly adjustable viscosity property, SMA solutions are also tolerant to high temperatures and salt concentrations. Supramolecular solutions can be considered as healable polymer systems, since unlike conventional polymer they disassemble and re-assemble when exposed to high temperature and stress conditions. In such conditions, conventional polymers generally undergo degradation. Additionally, through molecular scission processes SMA solutions can also be used in highly confining environments as well as in permafrost conditions and thin zones where conventional thermal techniques are not applicable. The objective of this work is the development of novel SMA system that have the aforementioned properties of reversibly adjustable viscosity through pH, tolerance to high temperature and salt concentrations through desired interfacial properties. Lab-scale preliminary results have shown the potential economic benefits of the use of SMA solutions on a field-wide scale. Based on the results, it must be emphasized that SMA systems have a worldwide application in oil reservoirs for EOR purposes.

Study on the mobility control ability of a quaternary ammonium salt active polymer for oil flooding

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Smart Nanoparticles for Conformance Improvement in Waterflooding

Next-Generation Gelling Agents for Improved Displacement in Enhanced Oil Recovery Processes

Synthesis and molecular dynamics simulation of amphoteric hydrophobically associating polymer

Role of the Polymer in the Emulsion Stability of an Amphoteric Polyacrylamide in Different Flooding Systems

Study on the Control of Steam Front Mobility in High-Temperature and High-Salinity Conditions Using Polymer-Enhanced Foam

Research on synthesis and salt thickening behavior of a binary copolymer amphiphilic polymer

Experimental and theoretical investigation of cationic-based fluorescent-tagged polyacrylate copolymers for improving oil recovery

The Demulsification Properties of Cationic Hyperbranched Polyamidoamines for Polymer Flooding Emulsions and Microemulsions

Synthesis and properties of AM/AMPS/MMA and cationic monomer copolymer flooding agent

Rheological properties and enhanced oil recovery performance of a novel sulfonate polyacrylamide

Study on the Structure–Activity Relationship and Oil Displacement Characteristics of the Polysurfactant Agent

A Laboratory Experimental Study on Enhancing the Oil Recovery Mechanisms of Polymeric Surfactants

Research on the properties of in situ emulsified active associative polymer with low molecular weight based on low permeability oil reservoirs

Enhancing Oil Recovery in Low-Permeability Reservoirs Using a Low-Molecular Weight Amphiphilic Polymer

Preparation and properties of nano-silica hybrid hydrophobic associated polyacrylamide for polymer flooding

Mechanistic Study on the Decrease in Injectivity during Salt-Resistant Polymer Flooding

Enhancing Oil Recovery from Low-Permeability Reservoirs with a Self-Adaptive Polymer: A Proof-of-concept Study

A novel active amphiphilic polymer for enhancing heavy oil recovery: Synthesis, characterization and mechanism

Synthesis and performance evaluation of a novel zwitterionic quaternary copolymer for enhanced oil‐recovery application