Abstract:Ultrasound detectors use high-frequency sound waves to image objects and measure distances, but the resolution of these readings is limited by the physical dimensions of the detecting element. Point-like broadband ultrasound detection can greatly increase the resolution of ultrasonography and optoacoustic (photoacoustic) imaging<a href="/articles/s41586-020-2685-y#ref-CR1">1</a>,<a href="/articles/s41586-020-2685-y#ref-CR2">2</a>, but current ultrasound detectors, such as those used for medical imaging, cannot be miniaturized sufficiently. Piezoelectric transducers lose sensitivity quadratically with size reduction<a href="/articles/s41586-020-2685-y#ref-CR3">3</a>, and optical microring resonators<a href="/articles/s41586-020-2685-y#ref-CR4">4</a> and Fabry–Pérot etalons<a href="/articles/s41586-020-2685-y#ref-CR5">5</a> cannot adequately confine light to dimensions smaller than about 50 micrometres. Micromachining methods have been used to generate arrays of capacitive<a href="/articles/s41586-020-2685-y#ref-CR6">6</a> and piezoelectric<a href="/articles/s41586-020-2685-y#ref-CR7">7</a> transducers, but with bandwidths of only a few megahertz and dimensions exceeding 70 micrometres. Here we use the widely available silicon-on-insulator technology to develop a miniaturized ultrasound detector, with a sensing area of only 220 nanometres by 500 nanometres. The silicon-on-insulator-based optical resonator design provides per-area sensitivity that is 1,000 times higher than that of microring resonators and 100,000,000 times better than that of piezoelectric detectors. Our design also enables an ultrawide detection bandwidth, reaching 230 megahertz at −6 decibels. In addition to making the detectors suitable for manufacture in very dense arrays, we show that the submicrometre sensing area enables super-resolution detection and imaging performance. We demonstrate imaging of features 50 times smaller than the wavelength of ultrasound detected. Our detector enables ultra-miniaturization of ultrasound readings, enabling ultrasound imaging at a resolution comparable to that achieved with optical microscopy, and potentially enabling the development of very dense ultrasound arrays on a silicon chip.

Miniaturized GaN-Based Optical Hydrophones for Underwater Low-Frequency Acoustic Detection

Miniature photonic-crystal hydrophone optimized for ocean acoustics

A novel fiber optic hydrophone and vector hydrophone

Detection of underwater low frequency sound wave based on SiO2 optical waveguide resonator

Capacitive Low-Frequency Hydrophone Based on Micronanostructured Iontronic Hydrogel for Underwater Monitoring

In-Situ Observing Ciliary Biomimetic Three-Dimensional Vector Hydrophone

Research on underwater acoustic detection technology based on optical waveguide resonator cavity

Design and implementation of a jellyfish otolith-inspired MEMS vector hydrophone for low-frequency detection

A Novel MEMS Based Piezoresistive Vector Hydrophone for Low Frequency Detection

Low-Cost, High-Sensitivity Hydrophone Based on Resonant Air Cavity

Listening to the underwater acoustic based on fiber optic tweezers technology

An Optical Fiber Hydrophone Using Equivalent Phase Shift Fiber Bragg Grating for Underwater Acoustic Measurement

Underwater Acoustic Wave Detection Based on Packaged Optical Microbubble Resonator

Suspended Graphene Hydroacoustic Sensor for Broadband Underwater Wireless Communications

A High-Performance Fiber-Optic Hydrophone for Large Scale Arrays

High-sensitivity compact ultrasonic detector based on a pi-phase-shifted fiber Bragg grating

Underwater Low-Frequency Acoustic Wave Detection Based on a High-Q CaF2 Resonator

Fabrication and Characterization of A Micromachined Acoustic Sensor with Integrated Optical Readout

A submicrometre silicon-on-insulator resonator for ultrasound detection

A Piezoelectric AlN MEMS Hydrophone with High Sensitivity and Low Noise Density

D-Shaped Fiber Bragg Grating Ultrasonic Hydrophone With Enhanced Sensitivity and Bandwidth