Abstract:Proportional-Integral-Derivative (PID) control has been the dominant control strategy in the process industry due to its simplicity in design and effectiveness in controlling a wide range of processes. However, most traditional PID tuning methods rely on trial and error for complex processes where insights about the system are limited and may not yield the optimal PID parameters. To address the issue, this work proposes an automatic PID tuning framework based on reinforcement learning (RL), particularly the deterministic policy gradient (DPG) method. Different from existing studies on using RL for PID tuning, in this work, we explicitly consider the closed-loop stability throughout the RL-based tuning process. In particular, we propose a novel episodic tuning framework that allows for an episodic closed-loop operation under selected PID parameters where the actor and critic networks are updated once at the end of each episode. To ensure the closed-loop stability during the tuning, we initialize the training with a conservative but stable baseline PID controller and the resultant reward is used as a benchmark score. A supervisor mechanism is used to monitor the running reward (e.g., tracking error) at each step in the episode. As soon as the running reward exceeds the benchmark score, the underlying controller is replaced by the baseline controller as an early correction to prevent instability. Moreover, we use layer normalization to standardize the input to each layer in actor and critic networks to overcome the issue of policy saturation at action bounds, to ensure the convergence to the optimum. The developed methods are validated through setpoint tracking experiments on a second-order plus dead-time system. Simulation results show that with our scheme, the closed-loop stability can be maintained throughout RL explorations and the explored PID parameters by the RL agent converge quickly to the optimum. Moreover, through simulation verification, the developed RL-based PID tuning method can adapt the PID parameters to changes in the process model automatically without requiring any knowledge about the underlying operating condition, in contrast to other adaptive methods such as the gain scheduling control.

Robot PID Control Using Reinforcement Learning

Single neuron predictive pid control

Model-Based Robot Learning Control with Uncertainty Directed Exploration

Robust Pid Controller Design Using Co-Evolutionary Particle Swarm Optimization

A Model-Based Reinforcement Learning Approach for PID Design

Toward Human-In-The-Loop Pid Control Based On Cacla Reinforcement Learning

A Proposal of Adaptive PID Controller Based on Reinforcement Learning

Stability-preserving automatic tuning of PID control with reinforcement learning

Deterministic Learning-Based Neural PID Control for Nonlinear Robotic Systems

A Self-adaptive LSAC-PID Approach based on Lyapunov Reward Shaping for Mobile Robots

PD Control Compensation Based on a Cascade Neural Network Applied to a Robot Manipulator

A Self-adaptive SAC-PID Control Approach based on Reinforcement Learning for Mobile Robots

Adaptive sliding mode control of robotic manipulator based on reinforcement learning

Based on Rehabilitation Robots of Motion Control Pid Research

Optimal PID and Antiwindup Control Design as a Reinforcement Learning Problem

Learning the Quadruped Robot by Reinforcement Learning (RL)

Robot target tracking control considering obstacle avoidance based on combination of deep reinforcement learning and PID

Control of Lower Limb Rehabilitation Robot Based on Fuzzy PID

Online PID Tuning Strategy for Hydraulic Servo Control Systems via SAC-Based Deep Reinforcement Learning

TD3 Algorithm of Dynamic Classification Replay Buffer Based PID Parameter Optimization

Hierarchical Control of Liquid Level System Based on Reinforcement Learning