Learning the Quadruped Robot by Reinforcement Learning (RL)

A. Issa,A. Aldair
DOI: https://doi.org/10.37917/ijeee.18.2.15
2022-10-06
Iraqi Journal for Electrical And Electronic Engineering
Abstract:In this paper, a simulation was utilized to create and test the suggested controller and to investigate the ability of a quadruped robot based on the SimScape-Multibody toolbox, with PID controllers and deep deterministic policy gradient DDPG Reinforcement learning (RL) techniques. A quadruped robot has been simulated using three different scenarios based on two methods to control its movement, namely PID and DDPG. Instead of using two links per leg, the quadruped robot was constructed with three links per leg, to maximize movement versatility. The quadruped robot-built architecture uses twelve servomotors, three per leg, and 12-PID controllers in total for each servomotor. By utilizing the SimScape-Multibody toolbox, the quadruped robot can build without needing to use the mathematical model. By varying the walking robot's carrying load, the robustness of the developed controller is investigated. Firstly, the walking robot is designed with an open loop system and the result shows that the robot falls at starting of the simulation. Secondly, auto-tuning are used to find the optimal parameter like (KP, KI, and KD) of PID controllers, and resulting shows the robot can walk in a straight line. Finally, DDPG reinforcement learning is proposed to generate and improve the walking motion of the quadruped robot, and the results show that the behaviour of the walking robot has been improved compared with the previous cases, Also, the results produced when RL is employed instead of PID controllers are better.
What problem does this paper attempt to address?