Abstract:In this technical note, an innovative thorium-uranium-fueled fusion-fission hybrid reactor (FFHR) design that employs a dual-coolant system to enhance U-233 breeding and is based on a three-dimensional engineering model is presented. The reactor consists of two kinds of modules: a water-cooled, thermal spectrum power generation natural uranium-fueled module and helium-cooled, fast spectrum fissile-breeding natural thorium-fueled modules, which are arranged alternately in the poloidal direction of the blanket. An interesting and important neutronic characteristic of the FFHR is found in this technical note: Energy multiplication is primarily determined by the uranium module parameters and is almost independent of the thorium module parameter. Uranium module design should first consider improving energy production. The Th-232 neutron capture rate is primarily determined by the thorium module parameters. The uranium module parameter has almost no influence on the Th-232 neutron capture rate in the thorium module. The uranium and thorium modules have weak coupling in neutronic behavior. However, with the fixed design parameters of the uranium and thorium modules, the most important influencing factor on energy multiplication factor M (the ratio of total blanket energy output and the fusion energy) and the U-233 breeding rate is the fraction of the external fusion neutron source irradiated on the uranium or thorium module or the blanket coverage rate of the uranium or thorium modules. Based on this characteristic, an innovative hybrid reactor design that employs a dual-coolant system is proposed in this technical note. Uranium modules still use water as the coolant to maintain a high energy multiplication factor, whereas helium is used as the coolant for the thorium module to obtain a fast neutron spectrum to enhance the U-233 breeding. The simulation results show that the helium-cooled thorium module is 2.5 times more efficient in U-233 breeding compared to the original water-cooled thorium module design. Approximately 10 tons of U-233 is produced after 20 years of operation for the helium-cooled thorium module design.

Fusion breeding and pure fusion development perceptions and misperceptions

Reprocessing free nuclear fuel production via fusion fission hybrids

Assessing the Risk of Proliferation via Fissile Material Breeding in ARC-class Fusion Power Plants

Fusion It is time to color outside the lines

Physical aspects for involvement of thermonuclear reactors into nuclear power systems

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Neutronic Study of an Innovative Thorium-Uranium–Based Fusion-Fission Hybrid Energy Reactor with 233U Breeding Enhancement by Using Dual-Coolant System

Neutronic Analysis of a Thorium-Uranium Fueled Water Cooled Fusion-Fission Hybrid Blanket

The Future of Nuclear Energy: Facts and Fiction Chapter IV: Energy from Breeder Reactors and from Fusion?

Fusion Energy Without Radioactivity: Laser Ignition of Solid Hydrogen–boron (11) Fuel

Re-examining the Role of Nuclear Fusion in a Renewables-Based Energy Mix

Maximizing specific energy by breeding deuterium

Advancing Methods for Fusion Neutronics: An Overview of Workflows and Nuclear Analysis Activities at UKAEA

The Neutronics Studies of Fusion Fission Hybrid Power Reactor

When will fusion energy truly become a reality?

Neutronics Performance Of A Fusion-Fission Hybrid Reactor With Pressure Tube Assemblies

Lowering the reactor breakeven requirements for proton-Boron 11 fusion

Long-Term Research & Design Strategies for Fusion Energy Materials

Materials research for fusion

Progress in Physics Design of Fusion-Fission Hybrid Energy Reactor

CURRENT STATUS, CHALLENGES AND PROSPECTS OF CONTROLLED NUCLEAR FUSION: THE TECHNOLOGY