Abstract:SUMMARY The purpose of this paper is to present to the power industry the true effect of GIC on power transformers. First, the phenomenon of part – cycle, semi – saturation of transformer cores due to GIC is described briefly. The magnitude and wave – shape of the resulting magnetizing current pulse are given for of an example large power transformer when subjected to different levels of GIC. The corresponding harmonics associated with these magnetizing current pulses are also presented. Proper evaluation of this magnetizing current pulse and the associated high order harmonics are critical to the determination of the response of power systems to a GIC event. In the discussion of the effects of GIC on the temperature rises in windings and structural parts of a power transformer, typical signatures of GIC associated with Solar Magnetic events are presented. Based on these measured signatures, calculations are presented in the paper for winding and structural parts hot spot temperature rises due to a representative GIC signature. One of the most significant contributions of this paper is a detailed description of some of the cases in which power transformers were reported to have suffered damage, or over – heating, during past GIC events which was blamed solely on GIC. Also presented in this paper, are actual measurements, made by 3 major utilities on full size power transformers when subjected to high levels of DC. The paper demonstrates that, because of the nature of the GIC currents, the great majority of power transformers would not experience damaging overheating due to even high levels of GIC. Only transformers with certain design features could suffer some winding damage due to high winding circulating currents when exposed to high levels of GIC. The paper also presents the real issue with GIC; namely, the narrow pulse of the magnetizing current which results from part – cycle, core semi – saturation when subjected to high levels of GIC currents. This one current pulse / cycle causes relays and capacitive components in power systems, such as SVC(s), to trip causing grid instability. Also, the current pulse is associated with higher order harmonics. As a result, resonance may occur, differential relays may operate, and stability of the grid may be compromised.

Transformer failures in regions incorrectly considered to have low GIC-risk

Geomagnetically Induced Current Model in New Zealand across Multiple Disturbances: Validation and Extension to non‐Monitored Transformers

Analysis of long‐term GIC measurements in transformers in Austria

Global transformer overheating from geomagnetic storms

Impact of Geomagnetically Induced Currents on High Voltage Transformers in Malaysian Power Network and its Mitigation

The Impact of Geomagnetically Induced Current on Single-Phase Saturable Transformer

Effects of Geomagnetically Induced Currents on Power Transformers and Power Systems

Sudden Commencements and Geomagnetically Induced Currents in New Zealand: Correlations and Dependance

Geomagnetically Induced Currents in the Irish Power Network during Geomagnetic Storms

Geomagnetically Induced Currents at Middle Latitudes: 1. Quiet‐time Variability

The Effects of Correctly Modeling Generator Step-Up Transformer Status in Geomagnetic Disturbance Studies

Modeling Geomagnetically Induced Currents from Magnetometer Measurements: Spatial Scale Assessed with Reference Measurements

A Detailed Model of the Irish High Voltage Power Network for Simulating GICs

Dissolved Gas Analysis and Application of Artificial Intelligence Technique for Fault Diagnosis in Power Transformers: A South African Case Study

Modeling Geomagnetically Induced Currents in the Alberta Power Network: Comparison and Validation Using Hall Probe Measurements During a Magnetic Storm

Geomagnetically induced currents in an electric power transmission system at low latitudes in Brazil: A case study

Harmonic Anomalies due to Geomagnetically Induced Currents as a Potential Cause of Protection Mal-Trips at the South Atlantic Anomaly Area

Analysis of a 110kV Transformer Near-Area Short-Circuit Fault Resulting in Winding Deformation and Management Measures

Comparison Between 1-D and 3-D Geoelectric Field Methods to Calculate Geomagnetically Induced Currents: A Case Study

Power Transformers Insulation Faults Identification with DGA: A Molecular Dynamics-Assisted Method

The Role of Global/Regional Earth Conductivity Models in Natural Geomagnetic Hazard Mitigation