Effects of Geomagnetically Induced Currents on Power Transformers and Power Systems

K. Vedante,R. Girgis,K. Gramm

Abstract:SUMMARY The purpose of this paper is to present to the power industry the true effect of GIC on power transformers. First, the phenomenon of part – cycle, semi – saturation of transformer cores due to GIC is described briefly. The magnitude and wave – shape of the resulting magnetizing current pulse are given for of an example large power transformer when subjected to different levels of GIC. The corresponding harmonics associated with these magnetizing current pulses are also presented. Proper evaluation of this magnetizing current pulse and the associated high order harmonics are critical to the determination of the response of power systems to a GIC event. In the discussion of the effects of GIC on the temperature rises in windings and structural parts of a power transformer, typical signatures of GIC associated with Solar Magnetic events are presented. Based on these measured signatures, calculations are presented in the paper for winding and structural parts hot spot temperature rises due to a representative GIC signature. One of the most significant contributions of this paper is a detailed description of some of the cases in which power transformers were reported to have suffered damage, or over – heating, during past GIC events which was blamed solely on GIC. Also presented in this paper, are actual measurements, made by 3 major utilities on full size power transformers when subjected to high levels of DC. The paper demonstrates that, because of the nature of the GIC currents, the great majority of power transformers would not experience damaging overheating due to even high levels of GIC. Only transformers with certain design features could suffer some winding damage due to high winding circulating currents when exposed to high levels of GIC. The paper also presents the real issue with GIC; namely, the narrow pulse of the magnetizing current which results from part – cycle, core semi – saturation when subjected to high levels of GIC currents. This one current pulse / cycle causes relays and capacitive components in power systems, such as SVC(s), to trip causing grid instability. Also, the current pulse is associated with higher order harmonics. As a result, resonance may occur, differential relays may operate, and stability of the grid may be compromised.

Engineering,Physics