Abstract:A novel sequential chemical bath deposition (CBD) strategy is designed to regulate Sb2(S,Se)3 film profiles. The Se+S strategy produced Se‐rich Sb2(S,Se)3 thin films with good crystal orientation, favorable band alignment, and low defect density, resulting in solar cells with a record efficiency of 9.29% for the CBD‐manufactured Sb2(S,Se)3 devices. Recently, solution‐processed antimony sulfoselenide (Sb2(S,Se)3) thin films and solar cells have gained popularity and achieved impressive results. One of the most effective improvements is the chemical bath deposition (CBD) approach, which is gentle, highly adjustable, and scalable. However, development in alloyed Sb2(S,Se)3 using this process has been modest, with a power conversion efficiency (PCE) of roughly 8%. In this work, a sequential CBD deposition strategy is designed, introducing sulfur (S) or selenium (Se) sources at different stages of the CBD process to achieve high‐quality Sb2(S,Se)3 thin films and devices. Impressively, adding a moderate amount of sodium thiosulfate and thioacetamide as mixed sulfur sources during the CBD deposition of Sb2Se3 can produce Se‐rich Sb2(S,Se)3 films with high crystallinity, suitable bandgaps, low defect density, and favorable energy level alignment. With a short‐circuit current density (JSC) of 26.80 mA cm−2 and a fill factor (FF) of 65.89%, the solar cells with the FTO/CdS/Sb2(S,Se)3/Spiro‐OMeTAD/Au structure obtained an impressive PCE of 9.29%, the highest to date for Sb2(S,Se)3 solar cells manufactured with the CBD process. This study provides a feasible approach for enhancing the performance of CBD‐produced Sb2(S,Se)3 solar cells and offers new insights and techniques for the synthesis of other complex multicomponent thin films.

Effect of thickness and Se distribution of Sb2S3-ySey thin films to solar cell efficiency

Composition engineering of antimony selenosulfide films using hydrothermal method for efficient solar cells

Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization

Fabricating High‐Efficiency Sb2(S,Se)3 Solar Cells by Novel Additive‐Assisted Longitudinal Component Engineering

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

The Effect of Deposition Time Optimization on the Photovoltaic Performance of Sb2Se3 Thin-Film Solar Cells

Selenium‐Rich Sb2(S,Se)3 Thin Films Deposited via Sequential Chemical Bath Deposition for High‐Efficiency Solar Cells

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb 2 (S,Se) 3 Solar Cells with 10.7% Efficiency

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells

Thermal evaporation–deposited hexagonal CdS buffer layer with improved quality, enlarged band gap, and reduced band gap offset to boost performance of Sb2(S,Se)3 solar cells

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Achievable efficiency improvement of Sb2Se3 thin-film solar cells through interface engineering

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Temperature‐Gradient Solution Deposition Amends Unfavorable Band Structure of Sb2(S,Se)3 Film for Highly Efficient Solar Cells

Confined‐space selenium assisted tellurization post‐treatment strategy for efficient full‐inorganic Sb2S3 thin film solar cells

Solution‐Processed Sb2(S, Se)3 Seeds‐Assisted Sb2Se3 Thin Film Growth for High Efficiency Solar Cell

Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells