Abstract:Today, there are technologies for recycling lithium power sources, but they are not yet satisfactory and cost-effective. The purpose of the study - based on the analysis of scientific and technical publications to formulate a general description of modern technologies for recycling lithium power sources. The second purpose is to present the results of the authors' research on the improvement of lithium battery recycling technologies. Based on the analysis of scientific and technical publications, a general description of modern technologies for processing lithium power sources is given. Processing is carried out according to the following scheme. First, they organize the discharge of power sources and their pre-treatment to separate the active substances. Pre-treatment is carried out by mechanical grinding, or ultrasound, or calcination or solvents. Mechanical crushing is performed in blade crushers. Machining is the most common method of separating lithium batteries. However, it has disadvantages: loud noise, emissions of dust and harmful gases. Calcination takes place at temperatures up to 500 ° C to remove carbon and organic material. Disadvantages of the method: calcination requires expensive equipment, is energy-intensive and can emit toxic gases. Solvent pre-treatment uses solutions and solvents to separate the active materials from Al, Cu foil in the battery. This method removes the addition of binder material, which increased the contact of the foil with the active materials. Disadvantages: this method requires the use of hot organic solvents of about 100 ̊C, which increases the cost and creates hazardous waste into the environment. More promising is the method of processing batteries in ultrasonic cavitation. The pre-treated material is subjected to magnetic or gravitational separation, removing substances containing metals. Then Li, Co, Ni, Mn are removed by pyrometallurgy, or hydrometallurgy, or electrochemical extraction. The obtained metals are suitable for secondary use in lithium power sources. The analysis of the considered technologies of processing of lithium power sources indicates that an important way to increase the efficiency of recycling is to improve the quality of pre-treatment of products that have exhausted the resource, which allows to effectively remove active materials with the lowest energy costs and environmental risks. The authors have developed a schematic diagram of the technology of pre-treatment of lithium batteries based on acoustic or hydrodynamic cavitation, as well as improved the method of magnetic separation of metals.

Ecological Aspects of Integrated Technology for Processing Lithium-Cobalt Batteries with the Production of Pelletized Target Products

Methods of recycling of lithium power sources

Selective Metal Recovery: Innovating Leaching from Lfp-NMC Cathode Mixtures in Lithium-Ion Batteries

Optimization of a Pyrometallurgical Process to Efficiently Recover Valuable Metals from Commercially Used Lithium-Ion Battery Cathode Materials LCO, NCA, NMC622, and LFP

Ecological Recycling of Lithium-Ion Batteries from Electric Vehicles with Focus on Mechanical Processes

Recovery of Lithium and Heavy Non-Ferrous Metals from Spent Lithium-Ion Batteries

Environmentally-friendly Oxygen-Free Roasting/wet Magnetic Separation Technology for in Situ Recycling Cobalt, Lithium Carbonate and Graphite from Spent LiCoO 2 /graphite Lithium Batteries

Recycling of Cobalt Oxides Electrodes from Spent Lithium-Ion Batteries by Electrochemical Method

Universal and efficient extraction of lithium for lithium-ion battery recycling using mechanochemistry

Assessment of an Eco-efficient Process for the optimization of metal recovery in Lithium Cobalt Oxide and Lithium Nickel Manganese Cobalt Oxide Batteries

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries

Characterization and recycling of lithium nickel manganese cobalt oxide type spent mobile phone batteries based on mineral processing technology

A Combined Hydro-Mechanical and Pyrometallurgical Recycling Approach to Recover Valuable Metals from Lithium-Ion Batteries Avoiding Lithium Slagging

Processing and Characterization of Spent Nickel–Metal Hydride Type AA Batteries to Recover Valuable Materials (Cobalt, Nickel and Rare Earth Elements)

Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

An Approach to Processing of Lithium-Ion Batteries for the Zero-Waste Recovery of Materials

Advanced Recycling and Recovery of Spent Lithium-Ion Batteries with Bioleaching Processes using A. ferrooxidans to Achieve Cleaner Battery Production

Mass balance and economic study of a treatment chain for nickel, cobalt and rare earth elements recovery from Ni-MH batteries

Lithium-Ion Battery Recycling: Metal Recovery from Electrolyte and Cathode Materials by Electrodialysis

Closed-Loop Recycling of Lithium, Cobalt, Nickel, and Manganese from Waste Lithium-Ion Batteries of Electric Vehicles