Abstract:Silicon-based anodes are promising to replace graphite-based anodes for high-capacity lithium-ion batteries (LIB). However, the charge–discharge cycling suffers from internal stresses created by large volume changes of silicon, which form silicon-lithium compounds, and excessive consumption of lithium by irreversible formation of lithium-containing compounds. Consumption of lithium by the initial conditioning of the anode, as indicated by low initial coulombic efficiency (ICE), and subsequently continuous formation of solid-electrolyte-phase (SEI) on the freshly exposed silicon surface, are among the main issues. A high-performance, silicon-based, high-capacity anode exhibiting 88.8% ICE and the retention of 2 mAh/cm2 areal capacity after 200 discharge–charge cycles at the rate of 1 A/g is reported. The anode is made on a copper foil using a mixture of 70%:10%:20% by weight ratio of silicon flakes of 100 × 800 × 800 nm in size, Super P conductivity enhancement additive, and an equal-weight mixture of CMC and SBR binders. Pyrolysis of fabricated anodes at 700 °C in argon environment for 1 h was applied to convert the binders into a porous graphitic carbon structure that encapsulates individual silicon flakes. The porous anode has a mechanically strong and electrically conductive graphitic carbon structure formed by the pyrolyzed binders, which protect individual silicon flakes from excessive reactions with the electrolyte and help keep small pieces of broken silicon flakes together within the carbon structure. The selection and amount of conductivity enhancement additives are shown to be critical to the achievement of both high-ICE and high-capacity retention after long cycling. The Super P conductivity enhancement additive exhibits a smaller effective surface area where SEI forms compared to KB, and thus leads to the best combination of both high-ICE and high-capacity retention. A silicon-based anode exhibiting high capacity, high ICE, and a long cycling life has been achieved by the facile and promising one-step fabrication process.

High cycling stability anode of interlayer silicon film with carbon buffer layer on 3D collector

Rational Design of Three-Dimensional Macroporous Silicon As High Performance Li-ion Battery Anodes with Long Cycle Life

Self-assembled three-dimensional Si/carbon frameworks as promising lithium-ion battery anode

Synthesis and Surface Engineering of Composite Anodes by Coating Thin-Layer Silicon on Carbon Cloth for Lithium Storage with High Stability and Performance

Ultrahigh areal capacity silicon anodes realized via manipulating electrode structure

In Situ Growth of Silicon Carbide Interface Enhances the Long Life and High Power of the Mulberry-Like Si-based Anode for Lithium-Ion Batteries

Three-dimensionally multiple protected silicon anode toward ultrahigh areal capacity and stability

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

3D printed silicon-based micro-lattices with ultrahigh areal/gravimetric capacities and robust structural stability for lithium-ion batteries

Flexible Porous Silicon/Carbon Fiber Anode for High−Performance Lithium−Ion Batteries

Alleviating the volume expansion of silicon anodes by constructing a high-strength ordered multidimensional encapsulation structure

Constructing triple-protected Si/SiOx@ZnO@C anode derived from volatile silicon waste for enhanced lithium storage capacity

The preparation of mass producible, highly-cycling stable Si/C anode materials with nano-sized silicon crystals embedded in highly amorphous silicon matrix

High-ICE and High-Capacity Retention Silicon-Based Anode for Lithium-Ion Battery

Construction of three-dimensional carbon framework-loaded silicon nanoparticles anchored by carbon film for high-performance lithium-ion battery anode materials

Stabilizing the Bulk-Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient-Hierarchically Ordered Conductive Networks

Enhanced Silicon Anodes with Robust SEI Formation Enabled by Functional Conductive Binder

Three‐Dimensional Porous Carbon–Silicon Frameworks As High‐Performance Anodes for Lithium‐Ion Batteries

Multilayered Silicon Embedded Porous Carbon/graphene Hybrid Film As a High Performance Anode

Carbon Nanofiber Interlayer: a Highly Effective Strategy to Stabilize Silicon Anodes for Use in Lithium-Ion Batteries

Facile Synthesis of Sponge-Like Porous Nano Carbon-Coated Silicon Anode with Tunable Pore Structure for High-Stability Lithium-Ion Batteries