Abstract:High-theoretical-capacity silicon anodes hold promise in lithium-ion batteries (LIBs). Nevertheless, their huge volume expansion (∼300%) and poor conductivity show the need for the simultaneous introduction of low-density conductive carbon and nanosized Si to conquer the above issues, yet they result in low volumetric performance. Herein, we develop an integration strategy of a dually encapsulated Si structure and dense structural engineering to fabricate a three-dimensional (3D) highly dense Ti3C2Tx MXene and graphene dual-encapsulated Si monolith architecture (3C2Tx@G). Because of its high density (1.6 g cm–3), high conductivity (151 S m–1), and 3D dense dual-encapsulated Si architecture, the resultant 3C2Tx@G monolith anode displays an ultrahigh volumetric capacity of 5206 mAh cm–3 (gravimetric capacity: 2892 mAh g–1) at 0.1 A g–1 and a superior long lifespan of 800 cycles at 1.0 A g–1. Notably, the thick and dense monolithic anode presents a large areal capacity of 17.9 mAh cm–2. In-situ TEM and ex-situ SEM techniques, and systematic kinetics and structural stability analysis during cycling demonstrate that such superior volumetric and areal performances stem from its dual-encapsulated Si architecture by the 3D conductive and elastic networks of MXene and graphene, which can provide fast electron and ion transfer, effective volume buffer, and good electrolyte permeability even with a thick electrode, whereas the dense structure results in a large volumetric performance. This work offers a simple and feasible strategy to greatly improve the volumetric and areal capacity of alloy-based anodes for large-scale applications via integrating a dual-encapsulated strategy and dense-structure engineering.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c11298.Supplemental experimental section (synthesis of Ti3C2Tx MXene and in-situ TEM observation), calculation methods (S1–S5) for volumetric density, compacted density, the content of Si, conductivity, volumetric capacity, and matching principle for the full cell, and additional results in Figures S1–S14 and Table S1 (PDF)Supplementary video S1 showing the first lithiation and delithiation process at 40× (MP4)Supplementary video S2 showing the second to fifth lithiation process at 100× (MP4)This article has not yet been cited by other publications.

Alleviating the volume expansion of silicon anodes by constructing a high-strength ordered multidimensional encapsulation structure

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Structure and Conductivity Enhanced Treble-Shelled Porous Silicon As an Anode for High-Performance Lithium-Ion Batteries

Hierarchical Carbon Shell Compositing Microscale Silicon Skeleton As High-Performance Anodes for Lithium-Ion Batteries

Controlled Interfacial Tailoring of Hierarchical Silicon Synergizes Charge Transport Enabling Stable and Fast Lithium Storage

Surface-engineered Mesoporous Silicon Microparticles As High-Coulombic-efficiency Anodes for Lithium-Ion Batteries

Critical Thickness of Phenolic Resin-Based Carbon Interfacial Layer for Improving Long Cycling Stability of Silicon Nanoparticle Anodes

Mechanically Reinforced Localized Structure Design to Stabilize Solid-Electrolyte Interface of the Composited Electrode of Si Nanoparticles and TiO2 Nanotubes

Dynamic Mechanical Equilibrium of Silicon Anodes for Lithium-ion Batteries Enabled by Surface Hydroxyl-Rich Bonding

Encapsulating Si Nanoparticles in Multi-Shell Hollow Spheres: an Effective Approach to Boost the Cyclability

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

Stabilizing the Bulk-Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient-Hierarchically Ordered Conductive Networks

Integrating Dually Encapsulated Si Architecture and Dense Structural Engineering for Ultrahigh Volumetric and Areal Capacity of Lithium Storage

Boosting the anode performance of the porous Si coated with polydopamine and cross-linked with sodium alginate

Covalent Coating of Micro‐Sized Silicon With Dynamically Bonded Graphene Layers Toward Stably Cycled Lithium Storage

A bimetallic ZIFs-triggered hierarchical carbon structure for stabilized silicon anode

Nonfilling carbon coating of porous silicon micrometer-sized particles for high-performance lithium battery anodes.

Synergistic Protecting-Etching Synthesis of Carbon Nanoboxes@Silicon for High-Capacity Lithium-Ion Battery.

Silver-Assisted Chemical Etching for the Fabrication of Porous Silicon N-Doped Nanohollow Carbon Spheres Composite Anodes to Enhance Electrochemical Performance

Amorphous SiO 2 Nanoparticles Encapsulating a SiO Anode with Strong Structure for High-Rate Lithium-Ion Batteries