Abstract:This work presents the results of two-dimensional modeling of the effects of non-equilibrium excitation and electrode geometry on H2/air ignition in a nanosecond plasma discharge. A multiscale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC) based on PASSKEy discharge modeling package and compressible multi-component reactive flow solver ASURF+ is developed and validated. This model is applied to simulate the impact of non-equilibrium plasma excitation and electrode geometry and heat loss on the dynamics of the discharge from streamer to spark and ignition kernel development in a H2/air mixture with a pair of cylindrical electrodes. The results show that the plasma-generated species (N2(A), N2(B), N2(a′), N2(C), O(1D), O and H) in the spark and afterglow significantly accelerate the ignition kernel development. The increase of discharge voltage at the same total discharge energy promotes the non-equilibrium active species production. It is found that the production of electronically excited species at higher reduced electric field strength is more efficient in enhancing ignition in comparison to the vibrational excitation and heating. Moreover, the 2D simulation clearly reveals that the electric field and active species distribution are highly non-uniform. The streamers are initiated at the sharp outer edges of the negative and positive electrodes by a strong electric field while the electric field is much weaker at the centerline of the electrodes. Furthermore, the simulations reveal that the ignition enhancement is sensitive to the variation of electrode shape, diameter, and gap size due to the changes of electric field distribution and location of streamer formation. A cylindrical electrode produces a larger discharge volume and ignition kernel than the parabolic and spherical electrodes, when the discharge is localized near the axis of the gap. It is found that there is a non-monotonic dependence of ignition kernel size on the electrode diameter and inter-electrode distance. The increase of electrode diameter and gap size above the optimal conditions leads to the reduction of ignition kernel volume, due to the decrease of active species concentration and gas temperature. At a larger electrode surface area and electrode diameter as well as smaller electrode gap size, the heat loss to electrode plays a greater role in reducing the ignition kernel size and slowing ignition kernel development. This work provides insights and guidance to understand the kinetic enhancement of non-equilibrium plasma and the effects of electrode geometries on ignition for the optimization ignitors in advanced engines.

Influence of the Moment of High Frequency Corona Discharge Initiation on the Combustion Development in a Hybrid Compression Engine

Modeling of the Effects of Non-Equilibrium Excitation and Electrode Geometry on H2/air Ignition in a Nanosecond Plasma Discharge

Analysis of Energy Transfer in the Ignition System for High-Speed Combustion Engines

Numerical Modeling of Ignition Enhancement by Repetitive Nanosecond Discharge in a Hydrogen/air Mixture II: Forced Ignition

Numerical Modeling Of Ignition Enhancement Using Repetitive Nanosecond Discharge In A Hydrogen/Air Mixture I: Calculations Assuming Homogeneous Ignition

Physics and chemistry of plasma-assisted combustion

Ignition Behaviors of Primary Reference Fuels in a Rapid Compression Machine under Vortex-Existing/minimized Conditions

Computational study of the influence of in-cylinder flow on spark ignition–controlled auto-ignition hybrid combustion in a gasoline engine

Multi-timescale Modeling of Ignition and Flame Regimes of N-Heptane-air Mixtures Near Spark Assisted Homogeneous Charge Compression Ignition Conditions

Simultaneous Lateral- and End-View Visualization of the Auto-Ignition of Primary Reference Fuels in a Rapid Compression Machine

Dual-frequency excited plasma enhanced ignition in a supersonic combustion chamber

The Relationship between In-Cylinder Flow-Field near Spark Plug Areas, the Spark Behavior, and the Combustion Performance inside an Optical S.I. Engine

Numerical Modeling of the Propagating Flame and Knock Occurrence in Spark-Ignition Engines

A numerical investigation of plasma-assisted ignition by a burst of nanosecond repetitively pulsed discharges

Impact of a split injection strategy on mixing, ignition and combustion behavior in Premixed charge compression ignition combustion

Effect of the Plasma Jet Ignition and Flame Kernel Under The Combustion Process in a Constant Volume Combustion Chamber

An Investigation of the Presence of Uncontrolled Combustion Phenomenon in Spark Ignition Single Cylinder Optical Engine

Comparison of Combustion Duration and End-Gas Autoignition in Inwardly and Outwardly Propagating Flames Induced by Different Ignition Configurations

Effect of ignition parameters on detonation initiation using toroidal shock wave focusing

Embedded direct numerical simulation of ignition kernel evolution and flame initiation in dual-fuel spray assisted combustion

Shock induced ignition and transition to detonation in the presence of mechanically induced non-linear acoustic forcing