Abstract:This work presents the results of two-dimensional modeling of the effects of non-equilibrium excitation and electrode geometry on H2/air ignition in a nanosecond plasma discharge. A multiscale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC) based on PASSKEy discharge modeling package and compressible multi-component reactive flow solver ASURF+ is developed and validated. This model is applied to simulate the impact of non-equilibrium plasma excitation and electrode geometry and heat loss on the dynamics of the discharge from streamer to spark and ignition kernel development in a H2/air mixture with a pair of cylindrical electrodes. The results show that the plasma-generated species (N2(A), N2(B), N2(a′), N2(C), O(1D), O and H) in the spark and afterglow significantly accelerate the ignition kernel development. The increase of discharge voltage at the same total discharge energy promotes the non-equilibrium active species production. It is found that the production of electronically excited species at higher reduced electric field strength is more efficient in enhancing ignition in comparison to the vibrational excitation and heating. Moreover, the 2D simulation clearly reveals that the electric field and active species distribution are highly non-uniform. The streamers are initiated at the sharp outer edges of the negative and positive electrodes by a strong electric field while the electric field is much weaker at the centerline of the electrodes. Furthermore, the simulations reveal that the ignition enhancement is sensitive to the variation of electrode shape, diameter, and gap size due to the changes of electric field distribution and location of streamer formation. A cylindrical electrode produces a larger discharge volume and ignition kernel than the parabolic and spherical electrodes, when the discharge is localized near the axis of the gap. It is found that there is a non-monotonic dependence of ignition kernel size on the electrode diameter and inter-electrode distance. The increase of electrode diameter and gap size above the optimal conditions leads to the reduction of ignition kernel volume, due to the decrease of active species concentration and gas temperature. At a larger electrode surface area and electrode diameter as well as smaller electrode gap size, the heat loss to electrode plays a greater role in reducing the ignition kernel size and slowing ignition kernel development. This work provides insights and guidance to understand the kinetic enhancement of non-equilibrium plasma and the effects of electrode geometries on ignition for the optimization ignitors in advanced engines.

Dual-frequency excited plasma enhanced ignition in a supersonic combustion chamber

Non-premixed Flame Dynamics Excited by Flow Fluctuations Generated from Dielectric-Barrier-Discharge Plasma

Enhancing Ignition and Inhibiting Extinction of Methane Diffusion Flame by in Situ Fuel Processing Using Dielectric-Barrier-discharge Plasma

An efficient approach to achieve flame acceleration and transition to detonation

Ignition Enhancement of Lean Kerosene Air Mixture by Multichannel Jet Enhanced Plasma Igniter

Long-gap ignition using femtosecond laser filament-triggered discharge

Flame development in prechamber assisted engine: High-speed PLIF

An experimental and computational study on the ignition process of a pulse modulated dual-RF capacitively coupled plasma operated at various low-frequency voltage amplitudes

Inlet Pulsation-Induced Extinction and Plasma-Assisted Stabilization of Premixed Swirl Flames

Effect of the Plasma Jet Ignition and Flame Kernel Under The Combustion Process in a Constant Volume Combustion Chamber

The precursor shock wave and flame propagation enhancement by CO2 injection in a methane-oxygen mixture

Extension Of Flammability And Stability Limits Of Swirling Premixed Flames By Ac Powered Gliding Arc Discharges

Modeling of the Effects of Non-Equilibrium Excitation and Electrode Geometry on H2/air Ignition in a Nanosecond Plasma Discharge

Counterflow Diffusion Flame Oscillations Induced by Ns Pulse Electric Discharge Waveforms

Acceleration of DDT by Non-Thermal Plasma in a Single-Trial Detonation Tube

Investigation into ignition and flame propagation in a combustor with prefilming and non-prefilming atomization

Experimental investigation of flow field features and spark ignition process in a multi-swirl airblast injector

Scramjet cavity ignition using nanosecond-pulsed high-frequency discharges

A computational study of a laminar methane-air flame assisted by nanosecond repetitively pulsed discharges

Physics and chemistry of plasma-assisted combustion

Investigation of Mechanisms in Plasma-Assisted Ignition of Dispersed Coal Particle Streams