Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Numerical study of concentration polarization of reverse osmosis film via the lattice Boltzmann method

Modeling of the Variations of Permeate Flux, Concentration Polarization, and Solute Rejection in Nanofiltration System

Analysis of Concentration Polarisation in Full-Size Spiral Wound Reverse Osmosis Membranes Using Computational Fluid Dynamics

Influence of the spacer filament on the flow and mass transfer in reverse osmosis seawater desalination membrane

Computational Fluid Dynamics Modeling of Hollow Membrane Filtration for Concentration Polarization

General validity of the exponential law for the effect of concentration polarization in reverse osmosis in a stirred-cell geometry, including an activity correction for 1:1 salt solutions

Analysis of concentration polarization in reverse osmosis and nanofiltration: zero-, one-, and two-dimensional models

Quantitative Evaluation of Concentration Polarization under Different Operating Conditions for Forward Osmosis Process

Using Orthorhombic Lattice Boltzmann Model to Research the Liquid Transport in Gas Diffusion Layer with Different Micro Porous Layer Coated

Analysis of Temperature and Concentration Polarizations for Performance Improvement in Direct Contact Membrane Distillation

Effective suppression of concentration polarization by nanofiltration membrane surface pattern manipulation: Numerical modeling based on LIF visualization

Theoretical study on concentration polarization in gas separation membrane processes

Simplifying concentration-polarization of trace-ions in pressure-driven membrane processes

Influential Analysis of Concentration Polarization on Water Flux and Power Density in PRO Process: Modeling and Experiments

A finite element model for concentration polarization and osmotic effects in a membrane channel

Relating Forward Water and Reverse Salt Fluxes to Membrane Porosity and Tortuosity in Forward Osmosis: CFD Modelling

Numerical Studies of Interfacial Phenomena in Liquid Water Transport in Polymer Electrolyte Membrane Fuel Cells Using the Lattice Boltzmann Method

Numerical analysis of permeate flux in reverse osmosis by varying strand geometry

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

The Trade-off Between Membrane Permselectivity and Conductivity: A Percolation Simulation of Mass Transport

A Novel Corrugated Wall Channel Module for External Concentration Polarization Mitigation in Forward Osmosis Process.