Abstract:In response to the intricate installation challenges and the elevated cost of sensors for measuring base shear in large‐scale structures, this paper proposes a noncontact measurement method integrating computer vision and model updating to invert structural base shear. The computer vision part measures physical displacement, while the nonlinear model updating section inverts base shear by refining the structural numerical model, thus achieving cost‐effective, noncontact inverting measurements. In the computer vision component, a highly real‐time and accurate optical flow estimation algorithm was selected and validated in actuator motion tracking tests, yielding a normalized root mean square error of less than 3% between displacement tracking and sensor measurable results. The model‐updating section adopts the Bouc–Wen model, demonstrating through numerical simulations its ability to swiftly calibrate the numerical model within 7000 steps under various noise interference levels, accurately obtaining structural base shear. Moreover, the influence of different response combinations and sampling frequencies on parameter identification for model updating is discussed. Findings indicate that when considering both displacement and acceleration, along with a sampling frequency of 200 Hz, parameter identification meets accuracy requirements due to reduced susceptibility to measurement noise. In addition, a shake table test on a three‐layer shear frame is conducted to further validate the proposed method's feasibility. Test results demonstrate that the amplitude and fluctuation trend of the shake table test's identification results mirror those of the numerical simulation results within the first 25 seconds, with a peak value error of 18.9%. While the error is relatively large, this paper provides a practical research framework for model updating and structural health monitoring. Simultaneously, it reduces the cost of acquiring structural response data during tests, thereby facilitating the application and promotion of computer vision technology in structural response monitoring.

A simulation-based and data-augmented shear force inversion method for offshore platform connector

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

Simulation of impact load on ship-platform collision

Mechanical Behavior Monitoring and Load Inversion Analysis of Large-Diameter Underwater Shield Tunnel During Construction

Hybrid Analysis Approach for Stochastic Response of Offshore Jacket Platforms

Noncontact Measurement Method for Inverting Structural Base Shear

A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques

Prediction of topside displacement of offshore platforms based on multi-source data fusion with multilayer perceptron neural network

Vifie-Based Prediction And Strength Analysis On Upending Of Spar

Modal strain energy based structural damage localization for offshore platform using simulated and measured data

Bayesian finite element model inversion of offshore wind turbine structures for joint parameter-load estimation

Dynamic deformation monitoring of an offshore platform structure with accelerometers

Performance analysis of the mooring system of a two-module scientific research and demonstration platform

Damage identification of offshore jacket platforms in a digital twin framework considering optimal sensor placement

Real-time safety risk assessment of floating offshore platforms based on on-site monitoring

FPSO/FLNG mooring system evaluation by Gaidai reliability method

Virtual model testing method for deepwater floating system

Utilizing Natural Frequency Monitoring and Machine Learning to Monitor and Predict Structural Integrity and Minimize the Cost of Fixed Offshore Platform Intervention

Predicting shear stress distribution on structural surfaces under internal solitary wave loading: A deep learning perspective

Modal analysis-based initial axial force recognition method for jacket platform