Abstract:Abstract. Floating wind turbines must withstand a unique and challenging set of loads from the wind and ocean environment. To de-risk development, accurate predictions of these loads are necessary. Uncertainty in modeling predictions leads to larger required safety factors, increasing project costs and the levelized cost of energy. Complex aero-hydro-elastic modeling tools use many input parameters to represent the wind, waves, current, aerodynamic loads, hydrodynamic loads, and structural properties. It is helpful to understand which of these parameters ultimately drives a design. In this work, an ultimate and fatigue-proxy load sensitivity analysis was performed with 35 different input parameters, using an elementary effects approach to identify the most influential parameters for a case study involving the National Renewable Energy Laboratory (NREL) 5 MW baseline wind turbine atop the OC4-DeepCwind semisubmersible during normal operation. The importance of each parameter was evaluated using 14 response quantities of interest across three operational wind speed conditions. The study concludes that turbulent wind velocity standard deviation is the parameter with the strongest sensitivity; this value is important not just for turbine loads, but also for the global system response. The system center of mass in the wind direction is found to have the highest impact on the system rotation and tower loads. The current velocity is found to be the most dominating parameter for the system global motion and consequently the mooring loads. All tested wind turbulence parameters in addition to the standard deviation are also found to be influential. Wave characteristics are influential for some fatigue-proxy loading but do not significantly impact the extreme ultimate loads in these operational load cases. The required number of random seeds for stochastic environmental conditions is considered to ensure that the sensitivities are due to the input parameters and not due to the seed. The required number of analysis points in the parameter space is identified so that the conclusions represent a global sensitivity. The results are specific to the platform, turbine, and choice of parameter ranges, but the demonstrated approach can be applied widely to guide focus in parameter uncertainty.

Bayesian finite element model inversion of offshore wind turbine structures for joint parameter-load estimation

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Synergy of random balance design method and intelligent optimization technique for model updating of the 4 MW offshore wind turbine benchmark

Attention Based Surrogate Model to Predict Load Envelope of Monopile Supporting Offshore Wind Turbines

Identification of Equivalent Wind and Wave Loads for Monopile-Supported Offshore Wind Turbines in Operating Condition

Model Tests on the Long-Term Dynamic Performance of Offshore Wind Turbines Founded on Monopiles in Sand

Validation of a model-based dual-band modal decomposition and expansion approach for fatigue monitoring of offshore wind turbine foundations

Hierarchical Bayesian finite element model updating: Optimal weighting of modal residuals with application to FINO3 offshore platform

Multi-parameter full probabilistic modeling of long-term joint wind-wave actions using multi-source data and applications to fatigue analysis of floating offshore wind turbines

Scaled Model Test Study of the Dynamic Behavior of an Offshore Wind Turbine Support Structure

On long-term fatigue damage estimation for a floating offshore wind turbine using a surrogate model

A modal decomposition and expansion approach for prediction of dynamic responses on a monopile offshore wind turbine using a limited number of vibration sensors

Statistical modeling of fully nonlinear hydrodynamic loads on offshore wind turbine monopile foundations using wave episodes and targeted CFD simulations through active sampling

Fatigue Stress Estimation for Submerged and Sub-Soil Welds of Offshore Wind Turbines on Monopiles Using Modal Expansion

Sensitivity analysis of numerical modeling input parameters on floating offshore wind turbine loads

Inverse modeling of damping and soil–structure interface for monopiled offshore wind turbines

Experimental Study of Ultra-Large Jacket Offshore Wind Turbine under Different Operational States Based on Joint Aero-Hydro-Structural Elastic Similarities

Structural Load Inversion and State Analysis of Floating Wind Turbine Tower Based on Joint Input-State Estimation

Unsupervised statistical estimation of offshore wind turbine vibration for structural damage detection under varying environmental conditions

Fatigue load simulation for foundation design of offshore wind turbines due to combined wind and wave loading