Abstract:Structural Health Monitoring, Ahead of Print. This work proposes a novel methodology for the automatic multi-objective optimisation of sensor paths in structural health monitoring (SHM) sensor networks using archived multi-objective simulated annealing. Using all of the sensor paths within a sensor network may not always be beneficial during damage detection. Many sensor paths may experience significant signal noise, attenuation, and wave mode conversion due to the presence of features, such as stiffeners, and hence impair the detection accuracy of the overall system. Many paths will also contribute little to the overall coverage level or damage detection accuracy of the network and can be ignored, reducing complexity. Knowing which paths to include, and which to exclude, can require significant prior expert knowledge, which may not always be available. Furthermore, even when expert knowledge is considered, the optimum path selection might not be achieved. Therefore, this work proposes a novel automatic procedure for optimising the sensor paths of an SHM sensor network to maximise coverage level, maximise damage detection accuracy and minimise the overall signal noise in the network due to geometric features. This procedure was tested on a real-world large composite stiffened panel with many geometric features in the form of frames and stiffeners. Compared to using all of the available sensor pairs, the optimised network exhibits superior performance in terms of detection accuracy and overall noise. It was also found to provide very similar performance, in terms of coverage level and overall signal noise, to a sensor path network designed based on prior expert knowledge but provided up to 35% higher damage detection accuracy. As a result, the novel procedure proposed in this work has the capability to design high-performing SHM sensor path networks for structures with complex geometries but without the need for prior expert knowledge, making SHM more accessible to the engineering community.

Global-local optimization layout method for active piezoelectric sensor driven by structural critical areas

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Research on Optimal Sensor Placement Method for Grid Structures Based on Member Strain Energy

OPTIMIZATION OF SENSOR PLACEMENT BY LOAD SENSITIVITY

Advances in Optimal Sensor Placement for Structural Health Monitoring

Optimal Distribution Of Actuator/Sensor In Piezothermoelectric Intelligent Structure

Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems: A piezoelectric finite element approach

Damage Identification Method Based on Ultrasonic Guided Wave Sensor Network and Path Optimization Bayesian Fusion Algorithm

Flexible, monolithic piezoelectric sensors for large-area structural impact monitoring via MUSIC-assisted machine learning

Optimization of piezoelectric sensor location for delamination detection in composite laminates

Sector Piezoelectric Sensor Array Transmitter Beamforming MUSIC Algorithm Based Structure Damage Imaging Method

Integrative approach for transducer positioning optimization for ultrasonic structural health monitoring for the detection of deterministic and probabilistic damage location

Optimization Method for Sensor Placement and Structural Damage Detection

Local Area Damage Detection in Composite Structures Using Piezoelectric Transducers

Wireless Structural Health Monitoring for Critical Members of Civil Infrastructures Using Piezoelectric Active Sensors

Finite Element Simulation and Piezoelectric Sensor Array-Driven Two-Stage Impact Location on Composite Structures

Integrated Structural Health Assessment Using Piezoelectric Active Sensors

Structural damage identification using piezoelectric impedance measurement with sparse inverse analysis

Multi-objective SHM sensor path optimisation for damage detection in large composite stiffened panels

Wireless Structural Health Monitoring and Early-Stage Damage Detection Using Piezoelectric Impedance Sensors

An adaptive sensor placement algorithm for structural health monitoring based on multi-objective iterative optimization using weight factor updating