Abstract:Structural damage detection using unmanned Structural Health Monitoring techniques is becoming the need of the day with the technologies available presently. Sensors made of Lead Zirconate Titanate materials, due to their simplicity and robustness, are increasingly used as an effective monitoring sensor in Structural Health Monitoring. Continuous monitoring of the structures using Lead Zirconate Titanate sensors often results in a laborious data retrieval process due to the large amount of signal generated. To speed up the data retrieval process, a multi-sensing technique in which the Lead Zirconate Titanate patches are connected in series and parallel is proposed for structural damage detection. The proposed method is validated using an experimental investigation carried out on a reinforced concrete beam embedded with smart Lead Zirconate Titanate sensor units. The beam is subjected to damage, and the location of damage is identified using conductance signatures obtained from patches sensed individually and through multiplexing. This article proposes an effective methodology for selection of patches to be connected in series/parallel to maximise the efficiency of damage detection. Damage quantification using conventional statistical metrics such as root mean square deviation, mean absolute percentage deviation and cross correlations are found to be ineffective in identifying the location of damage from the multiplexed signatures. In turn, dynamic metrics such as moving root mean square deviation, moving mean absolute percentage deviation and moving cross correlation with overlapped moving blocks of data are proposed in the present work and their ability to detect the damage location from multiplexed signatures is discussed.

Local Area Damage Detection in Composite Structures Using Piezoelectric Transducers

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Integrated Structural Health Assessment Using Piezoelectric Active Sensors

Experimental Investigation of Damage Detection in Composite Material Structures Using a Laser Vibrometer and Piezoelectric Actuators

Damage assessment of smart polymer-matrix sandwich composite using multi-physics responses of in-situ piezoelectric transducers

Structural-Damage Detection by Distributed Piezoelectric Transducers and Tuned Electric Circuits

Rapid Multi-Damage Identification for Health Monitoring of Laminated Composites Using Piezoelectric Wafer Sensor Arrays

Integration Technology with Thin Films Co-Fabricated in Laminated Composite Structures for Defect Detection and Damage Monitoring

An Integrated Acousto/Ultrasonic Structural Health Monitoring System for Composite Pressure Vessels

Damage detection in composite structures using piezoelectric materials (and neural net)

On Transducers Localization in Damage Detection by Wave Propagation Method

Damage Localization in Composite Laminates by Building in PZT Wafer Transducers: A Comparative Study with Surface‐Bonded PZT Strategy

IMPACT DAMAGE DETECTION IN COMPOSITE LAMINATE PLATES USING AN INTEGRATED PIEZOELECTRIC SENSOR AND ACTUATOR COUPLE COMBINED WITH WAVELET-BASED FEATURES EXTRACTION APPROACH

Quantitative Structural Damage Detection Using High-Frequency Piezoelectric Signatures Via The Reverberation Matrix Method

Recent Advances in Piezoelectric Wafer Active Sensors for Structural Health Monitoring Applications

A Coupled Approach for Damage Detection of Framed Structures Using Piezoelectric Signature

Application of piezoelectric MFC sensors and fiber Bragg grating sensors in structural health monitoring of composite materials

Nondestructive Damage Detection of a Magentostricive Composite Structure

On the Frequencies for Structural Health Monitoring in Plates with Symmetrical Damage: An Analytical Approach

Piezoelectric sensor–based damage progression in concrete through serial/parallel multi-sensing technique