Abstract:The removal and degradation of organic/inorganic pollutants from aqueous solutions have stimulated the interest of researchers in recent years using heterogeneous adsorbent nanocatalysts. In this study, the coupled CuO/Fe3O4 nanocomposite (NC) was prepared at one step with a simple, cost-effective, and eco-friendly method by Adiantum C.V leaf extract as a reducing agent. The crystallite sizes for the CuO and CuO/Fe3O4 samples were obtained of XRD results by the Williamson–Hall equation (about 32.26 and 24.49 nm) and the Scherrer equation (about 22.37 and 23.97 nm), respectively. The EDS results from CuO/Fe3O4 NCs indicated a mole ratio of 1:2 for CuO/Fe3O4. Catalytic activity studies of green synthesized CuO/Fe3O4 NCs (dosage: 0.1 g/L) have shown high removal efficiency for both methyl orange (MO) (1.2 × 10–5 M) and Cr(VI) (3.0 × 10–3 M) pollutants at alkaline pHs between a range of (3 and 10) with a contact time of about 110 min. The degradation extent of the MO and Cr(VI) pollutants was estimated by changes in the UV–vis absorbances set to at λmax = 465 and 542 nm, respectively. Adsorption kinetics for the degradation of both investigated pollutants followed the pseudo-first-order kinetics model. The kinetic result showed degradation rate was increased toward the increase in pH (3–10) and temperature (293–308 K). The calculated thermodynamic parameters (∆G°, ∆H°, and ∆S°) demonstrate that the adsorption of MO and Cr(VI) on the surface of green NCs is thermodynamically possible and spontaneous as temperature rises. Therefore, the present approach provides a potential method for preparing heterogeneous nanocatalysts for a wide range of applications in the degradation and reduction in organic/inorganic pollutants. In addition, the antibacterial effect of nanomaterials against gram-positive and gram-negative bacteria was tested at different concentrations of NCs (0.001–0.025 g/mL), which was in good agreement with the catalytic adsorption results for the degradation of both pollutants due to generated free radicals in aqueous solution.Graphical abstractSchematic of the possible mechanisms for the removal of MO dye and Cr(VI) metal ions from the aqueous solutions at different temperatures and pHs, using green synthesized CuO/Fe3O4 NCs by Adiantum C.V leaf extract in the present NaBH4.

Synthesis and characterization of Ag@M-BTC ( M = Zn & Cd) Nanocomposites for efficient removal of methylene blue and indigo carmine

Accelerated Decoloration of Organic Dyes from Wastewater Using Ternary Metal/g-C3N4/ZnO Nanocomposites: An Investigation of Impact of g-C3N4 Concentration and Ni and Mn Doping

Adsorption studies of Methylene Blue, Coomassie Brilliant Blue, and Congo Red dyes onto CuO/C nanocomposites synthesized via Vitex negundo Linn leaf extract

MXene—Reclaimed Cellulose Acetate Composites for Methylene Blue Removal Through Synergistic Adsorption and Photocatalysis

Synthesis of Porphyrin-based MOF/Cloisite-30B nanocomposite for selective dye adsorption: Optimization by Design-Expert, Adsorption, and Kinetic Study

Synthesis and characterization of a novel ternary magnetic composite for the enhanced adsorption capacity to remove organic dyes

Enhancing Photocatalytic Activity via Formation of Heterojunctions Introduced Through Postmetalation of Metal Organic Frameworks with Silver Ions

Chitosan‐nTiO2 Nanocomposite Synthesis and its Adsorptive Removal Capacity for Methylene Blue from its Aqueous Solution: Batch Adsorption Study and Modeling

A novel TMD/MOF (Transition Metal Dichalcogenide/Metalorganic frameworks) composite for highly and selective adsorption of methylene blue dye from aqueous mixture of MB and MO

Facile Synthesis of Cu–Zn Bimetallic MOF: Application as Superior Adsorbent for Effective Removal of Methylene Blue from Aqueous Solutions

High-efficient removal of methylene blue by zirconium-based organic frameworks modified with 1,3,5-benzenetricarboxylic acid: Characterization, performances, and mechanisms

Adsorption of different anionic and cationic dyes by hybrid nanocomposites of carbon nanotube and graphene materials over UiO-66

Bionanocomposite MIL-100(Fe)/Cellulose as a high-performance adsorbent for the adsorption of methylene blue

Synthesis of chitosan and gum arabic functionalized silver nanocomposite for efficient removal of methylene blue and antibacterial activity

Unveiling solar-powered efficiency for methylene blue photodegradation with Ag-doped CeO2/ZnO nanocomposites

Functionalized iron Oxide/MOF nanocomposite exhibiting excellent performance for methylene blue adsorption

Silver nanoparticle incorporated calcium crosslinked hydrogel composite for reduction of methylene blue dye and nitrite sensing

Investigation and characterization of biosynthesized green adsorbent CuO NPs and CuO/Fe3O4 NCs using Adiantum C.V leaf for removal MO dye and Cr(VI) metal ions: thermodynamic, kinetic, and antibacterial studies

Construction of Te-ZnO@S-g-C3N4 Heterojunction Nanocomposites for the Efficient Removal of Methylene Blue, Antifungal Activity, and Adsorption of Cr(VI) Ion

Controlled synthesis of Ag-doped CuO nanoparticles as a core with poly(acrylic acid) microgel shell for efficient removal of methylene blue under visible light

In situ preparation and characterization of Cr-MOF-alginates for methylene blue through the adsorption process