Abstract:Amongst many chemical pollutants that cause environmental pollution, the presence of organic dyes in water resources can cause substantial health issues. Thus, owing to their mutagenicity and their adverse effects on human health, environment, and animals, they must be removed from industrial wastewater. In this study, UiO-66 metal–organic framework, as well as composite nanoparticles with carbonaceous materials such as MWCNTs-COOH and graphene oxide (GO) with different molar ratios (2.9 and 5.8 wt.%), were synthesized through solvothermal method since carbonaceous materials are an emerging material that demonstrates improvement in the properties of adsorbents. Then, the synthesized materials were utilized as a solid adsorbent for removing four different dyes including; anionic methyl red (MR), anionic methyl orange (MO), cationic methylene blue (MB), and cationic malachite green (MG) prepared from distilled water. The properties of prepared adsorbents were characterized via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), Photoluminescence spectroscopy (PL), Brunauer–Emmett–Teller (BET), as well as surface area analyzer and energy dispersive spectroscopy (EDS-MAP). Further, the influences of various factors including initial concentrations of the dyes and adsorption process time on adsorption of dyes were investigated. Adsorption experiments indicated that synthesized adsorbents exhibited the highest adsorption efficiency towards MR and MO dyes. Moreover, the experimental adsorption results revealed that MWCNTs-UiO-66 nanocomposites could adsorb 98% of MR and MO as well as 72% of MB and 46% of MG. Furthermore, the kinetic and stability of the materials over time were investigated. To reach a clear picture, adsorption experiments demonstrated that the amount of dye uptake on adsorbents was enhanced by increasing the contact time as well as uptake of materials with time were stable for both cationic and anionic dyes. The MR, MO, and MB adsorption isotherms were fitted with the Langmuir and Freundlich models. The Langmuir showed the highest agreement in these dyes and MWCNTs-UiO-66 (2.9 and 5.8 wt.%) exhibited a maximum adsorption capacity of 105.26 mg/g for MR, while the MG isotherm was in line with the Langmuir model.

A novel TMD/MOF (Transition Metal Dichalcogenide/Metalorganic frameworks) composite for highly and selective adsorption of methylene blue dye from aqueous mixture of MB and MO

The Co‐UMO‐1 Metal Organic Framework: Solvothermal Synthesis of [Co3{μ3‐O}2(C14H8O6S)2(H2O)3(C2H5OH)] ⋅ 2H2O, Characterizations, and Application in Methylene Blue Removal

Magnetic Metal–Organic Framework (Fe3O4@MIL-101) Functionalized with Dendrimer: Highly Efficient and Selective Adsorption Removal of Organic Dyes

Synthesis of magnetic metal-organic framework (MOF) for efficient removal of organic dyes from water

Synthesis and characterization of a novel ternary magnetic composite for the enhanced adsorption capacity to remove organic dyes

In Situ Synthesis of Crystalline MoS2@ZIF-67 Nanocomposite for the Efficient Removal of Methyl Orange Dye from Aqueous Media

MOF/graphene Oxide Composite As an Efficient Adsorbent for the Removal of Organic Dyes from Aqueous Solution.

Thermal Oxidation Synthesis of MoS 2 /MoO 3 Composites for Cationic Dye Adsorption

Adsorption of Methylene Blue by Halloysite/MnFe2O4 Nanocomposites

Facile Preparation of Mos2 Based Polymer Composites Via Mussel Inspired Chemistry and Their High Efficiency for Removal of Organic Dyes

Selective adsorption performance of H6P2Mo15W3O62-based Cu3(BTC)2 composite in treatment of simulated cationic dye wastewater

Ternary Metal Oxide Embedded Carbon Derived from Metal Organic Frameworks for Adsorption of Methylene Blue and Acid Red 73.

Synthesis of Porphyrin-based MOF/Cloisite-30B nanocomposite for selective dye adsorption: Optimization by Design-Expert, Adsorption, and Kinetic Study

Mechanochemically Synthesized Schiff-base Engineered 2D Mixed-Linker MOF for CO2 Capture and Cationic Dyes Removal

Functionalized iron Oxide/MOF nanocomposite exhibiting excellent performance for methylene blue adsorption

High-efficient removal of methylene blue by zirconium-based organic frameworks modified with 1,3,5-benzenetricarboxylic acid: Characterization, performances, and mechanisms

Two‐Dimensional Copper‐Based Metal‐Organic Framework for Efficient Removal of Methylene Blue from Wastewater

Superior chemical stability of UiO-66 metal-organic frameworks (MOFs) for selective dye adsorption

Adsorption of different anionic and cationic dyes by hybrid nanocomposites of carbon nanotube and graphene materials over UiO-66

Adsorption of Methylene Blue on Azo Dye Wastewater by Molybdenum Disulfide Nanomaterials

Insights into High-Performance and Selective Elimination of Cationic Dye from Multicomponent Systems by Using Fe-Based Metal–Organic Frameworks