Abstract:Porous asphalt pavements need to be cured for 24 h~48 h before they can be opened to traffic. In an emergency, physical cooling methods, such as water sprinkling and air blowing, can be used to accelerate cooling, but the effects of the two methods on the mechanical properties and durability of porous asphalt mixtures are still unclear. In this research, firstly, the dropping and rising temperatures of the pavement surface during the water sprinkling process of newly laid porous asphalt mixtures in real projects were analyzed. The effects of the two conditions of water immersion and water sprinkling on the mechanical properties of porous asphalt mixtures were clarified, and water sprinkling technology for porous asphalt mixtures was proposed. Secondly, the effects of air blowing on the temperature reduction and strength loss of porous asphalt mixtures was analyzed, and the pavement surface temperature control standard that was suitable for air blowing was proposed. Finally, a seven-year observation was carried out on the water sprinkling cooling test section in the actual project. The research results show that water immersion or the sprinkling of water repeatedly during the curing period of porous asphalt pavements reduces the strength of the mixture. It is recommended to use a water amount of 0.3 kg/m2 once and sprinkling four times before painting road markings and two times after painting road markings; this was the best water sprinkling cooling process for porous asphalt pavements. The use of air blowing can accelerate the temperature reduction of porous asphalt mixtures, but the mechanical properties of the mixtures are attenuated after air blowing. Air blowing can be carried out when the pavement surface temperature is lower than 70 °C. Compared with the road section without water sprinkling for cooling, the use of the determined process to cool the newly laid porous asphalt mixtures by water sprinkling does not have a significant adverse effect on their durability. There is also no significant difference in the performances of the two road surfaces within a seven-year service. In an emergency, physical cooling methods, such as water sprinkling or air blowing, can be used to accelerate the temperature reduction of the newly laid porous asphalt mixtures, so as to achieve the purpose of quickly opening to traffic.

Evaporative cooling performance estimation of pervious pavement based on evaporation resistance

Influence of meteorological factors on evaporative cooling of steel slag permeable concrete pavement

Smart wetting of permeable pavements as an evaporative-cooling measure for improving the urban climate during heat waves

Effect of eco-friendly pervious concrete with amorphous metallic fiber on evaporative cooling performance

High‐performance and Wide Relative Humidity Passive Evaporative Cooling Utilizing Atmospheric Water

Design of smart wetting of building materials as evaporative cooling measure for improving the urban climate during heat waves

Dynamic Variation Characteristics and Influencing Factors of Evaporation Intensity of Permeable Pavement

Research on wet physical properties of permeable concrete pavement with different porosity

Assessment of the effectiveness of cool pavements on outdoor thermal environment in urban areas

Experimental study on the thermal characteristics of urban mockups with different paved streets

Improving outdoor human-thermal environment by optimizing the reflectance of water-retaining pavement through subjective field-based measurements

Field temperature performances of in-use permeable sidewalks and asphalt vehicle roads and the potential impacts on apparent temperature and land surface temperature

Nature-based cool pavements for urban overheating mitigation: experimental proof of concept

Numerical investigation of evaporative cooling strategies on the aero-thermal performance of courtyard buildings in hot-dry climates

Effect of heat mitigation strategies on the thermal environment of hardened pavement and pedestrian thermal comfort in a hot and humid area: A case study of Guangzhou, China.

An In-Situ Measurement and Assessment of Evaporative Cooling Effects of Low Impact Development Facilities in a Subtropical City

A review on the development of cool pavements to mitigate urban heat island effect

Development of Water Retentive and Thermal Resistant Cement Concrete and Cooling Effects Evaluation

Improving a pavement-watering method on the basis of pavement surface temperature measurements

Watering on porous pavement for improvement of environmental human thermal comfort in an ecological community in arid area: A case study in Lanzhou, China

Effects of Physical Cooling on the Temperature and Performance of Newly Laid Porous Asphalt Mixtures