Abstract:This work investigated the bubble size variation under various aqueous conditions, including saline and surfactant solutions, with different gas injection rates using a commercial bubble analyzer. The results show that salt and surfactant can minimize bubble size with increasing solute concentration, and the surfactant outperforms salt. In addition, the critical coalescence concentrations (CCC) of salt and surfactant could be determined at 20 g/l and 20 mg/l, respectively, over which bubble mean size cannot be further reduced. On the other hand, the gas injection rate, compared to the solute concentration, has minor effects on bubble size variation. Nonetheless, there is a critical coalescence injection rate (CCIR) of 30 ml/min for surfactant solution, over which the standard deviation of the bubble size distribution (BSD) cannot be further increased. In principle, this work improves the accuracy and efficiency of the bubble analyzer. It also presents a sound understanding of two influential factors rather than a single-factor controlling bubble size. Most importantly, it is the first time to observe and propose the concept of CCIR to describe how the gas injection rate influences the standard deviation of BSD. Based on those results and findings, it is able to conclude that bubble size control, whose mechanism has been previously identified as the bubble collision and coalescence rather than the surface tension of water solutions, is actually dominated by not only the solute concentration but also the gas injection rate when a porous air sparger is used to generate bubbles. It is expected that this work could contribute to laboratory modeling bubbly flow in a porous medium in order to bring more insights into the mechanism of soil gas leaking through soil strata.

Rheology, bubble-particle interaction and air bubble system: A study of the influence of inorganic salts on air entrainment by bubble rising measurement

Effect of Bulk Nanobubbles on the Entrainment of Kaolinite Particles in Flotation

Characteristic Analysis of Air Bubbles on the Rheological Properties of Cement Mortar

Investigations Of Dynamics Of A Single Spark-Induced Bubble In Saline Water

Experimental Investigation of Electrostatic Effect on Bubble Behaviors in Gas-Solid Fluidized Bed

The Effect of Inorganic Salt on Multiphase Flow Characteristics in a Microbubble Column: A Focus on the Ionic Strength

Distinct rheological behavior of kaolinite dispersions containing gas bubbles at different initial pore water pressures

An Experimental Study on Relationship among Water Sorptivity, Pore Characteristics, and Salt Concentration in Concrete

Rheology and air entrainment of fresh Portland cement mortars in simulated low air pressure environments

Effect of Cohesive Particle Addition on Bubbling Characteristics of Gas-Solid Fluidized Bed: Meso-scale Mechanism

Applying Imaging Technique to Investigate Effects of Solute Concentrations and Gas Injection Rates on Gas Bubble Generation

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Laboratory and numerical investigations on characteristics of air bubbles in plunging breakers on beach

Effect of the entrained air void on strength and interfacial transition zone of air-entrained mortar

Effects of Salts and Adsorption on the Performance of Air Entraining Agent with Different Charge Type in Solution and Cement Mortar

Dynamics of Rising Bubbles and Their Impact with Viscoelastic Fluid Interfaces

Experimental investigation on the characteristics of the shock wave emitted by the cavitation bubble near the air bubble