Abstract:Porous structures are ubiquitous in many thermal management and energy conversion systems. The morphology of a porous structure has significant impact on the fluid flow, heat/mass transport, and strength performance. However, the available fabrication techniques are not capable of directly tailoring porous structures with well-controlled pore features and functional graded pore morphology, thereby limiting the performance enhancements for these systems. In this study, a triply periodic minimal surface (TPMS) based method was developed to customize the morphology of porous media with well-controlled pore features and to fabricate these parts with additive manufacturing. Porous structures with designed pore parameters were built based on the mathematically defined iWP surface, primitive surface, diamond surface and gyroid surface. Before performing flow and heat transfer simulations, morphological analysis was conducted to establish the connections between the geometrical parameters and the performance of the porous structure (flow resistance, heat transfer, and strength). The porous structures were compared in terms of their structural strength, specific pressure drop, interstitial/volumetric heat transfer coefficients and the ratio of the Colburn factor relative to the friction factor. The TPMS porous structures indicated that much higher strength than the simple cubic packing structure (approximation of sintered metal particles) due to their reasonable struct connectivity. Computations demonstrated that the type P structure had the lowest flow resistance and highest comprehensive heat transfer coefficient (j/f). The high specific surface area, continuous changes in the flow direction, periodic mixing/redistribution and flow acceleration contributed to the higher volumetric heat transfer coefficients in the type W/G structures.

Development of Triply Periodic Minimal Surface (TPMS) Inspired Structured Cast Iron Foams through Casting Route

Mesostructural Design and Manufacturing of Open-Pore Metal Foams by Investment Casting

Investment Casting and Mechanical Properties of Open‐Cell Steel Foams

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Syntactic Iron Foams' Properties Tailored by Means of Case Hardening via Carburizing or Carbonitriding

Achieving Triply Periodic Minimal Surface Thin-Walled Structures by Micro Laser Powder Bed Fusion Process

Melt Flow and Solidification During Infiltration in Making Steel Matrix Syntactic Foams

Visual depiction and numerical characterization of intricate flow in triply periodic minimal surface foams

Mechanical and Metallurgical Properties of Foam Developed by Friction Stir Tube Deposition Technique

Morphology, Flow and Heat Transfer in Triply Periodic Minimal Surface Based Porous Structures

Thermo-Mechanical Behavior Analysis of Pressure Infiltration Casting Process for Manufacturing Open-Cell Metal Foam

A new sintering method for fabrication of open-cell metal foam parts

Architected flexible syntactic foams: Additive manufacturing and reinforcing particle driven matrix segregation

Microstructure and Deformation Response of TRIP-Steel Syntactic Foams to Quasi-Static and Dynamic Compressive Loads

Insight into classifications and manufacturing processes of metallic foams: A review

Modification of open-cell cast aluminum-silicon foams with strontium

Synthesis and Characterization of Ti-13Ta-6Sn Foams Produced Using Mechanical Alloying, the Space Holder Method and Plasma-Assisted Sintering

Al and A356 Alloy Foam Castings Modified with Low Concentrations of Nano-Sized Particles: Structural Study and Compressive Strength Tests

Effects of particle size, bimodality and heat treatment on mechanical properties of pumice reinforced aluminum syntactic foams produced by cold chamber die casting

Ultrastrong Hierarchical Porous Materials Via Colloidal Assembly and Oxidation of Metal Particles