Abstract:This study provides a fundamental understanding of the enhanced piezoelectric properties in ABO3 perovskite based lead-free piezoelectric materials. For this we synthesized (Ba0.95Ca0.05)(Zr0.05Ti0.95-x (Zn1/3Ta2/3) x )O3((1 - x)BCZT-(x)ZT) (x = 0.00, 0.005, 0.01, and 0.02) solid solutions exhibiting high piezoelectric response. The (1 - x)BCZT-xZT materials are synthesized by a high-temperature solid-state ceramic reaction method by varying x in the full range (x = 0.00-0.02). In-depth exploratory research is performed on the structural, dielectric, ferroelectric, and piezoelectric properties of (1 - x)BCZT-(x)ZT ceramics. The formation of perovskite structure for all ceramics without the presence of any impurity phases is confirmed by X-ray diffraction (XRD) analyses, which also reveals that the Ca2+, Zr4+, Zr2+ and Ta5+ are well dispersed within the BaTiO3 lattice. For all (1 - x)BCZT-(x)ZT ceramics, thorough investigation of phase formation and phase-stability using XRD, Rietveld refinement, Raman spectroscopy, and temperature-dependent dielectric measurements provide conclusive evidence for the coexistence of orthorhombic + tetragonal (Amm2 + P4mm) phases at room temperature. The steady transition of Amm2 crystal symmetry to P4mm crystal symmetry with increasing x content is also demonstrated by Rietveld refinement data and related analyses. The c/a ratio of the tetragonal phase greatly influenced the electric properties of the ceramics. The c/a ratio of the tetragonal phase increases from 1.0112 for x = 0 to 1.0157 for x = 0.005 and subsequently decreases to 1.0038 for x = 0.02. When the c/a of the tetragonal phase reaches its maximum value, the ceramic with x = 0.005 has the best piezoelectricity (d 33 ∼ 297 pC N-1). The calculated degree of relaxation (γ) increases with the increase in BZT content, indicating that the BCZT-xBZT ceramics are ferroelectric materials with diffuse phase transition. Main dielectric, piezoelectric and ferroelectric parameters of (1-x)BCZT-xZT ceramics were optimized around x = 0.005 with a high piezoelectric coefficient (d 33 = 297 pC N-1), a remnant polarization (P r = 7.58 μC cm-2), spontaneous polarization (P s = 10.25 μC cm-2) and a high dielectric constant (ε max,T c = 4449 at T c and 2330 near RT) at 1 kHz, indicating promising applications for lead-free piezoelectric ceramics.

A comprehensive analysis of the structural, microstructural, optical, and piezocatalytic activity of Ba0.92Ca0.08Zr0.09Ti0.91O3 and Ba0.98Ca0.02Zr0.07Ti0.93O3 lead-free ceramics

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Microstructure and Piezoelectric Properties of Ba ( Ti0.8 Zr0.2)O3-(Ba0.7Ca0.3)TiO3 Lead-free Ceramics

Preparation and properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 lead-free ceramics via vat photopolymerization

Tailoring Multifunctional Performance of Dy-doped (ba0.85ca0.15)(zr0.1ti0.9)o3 Ceramics Via Optimizing Ceramic Processing

Porosity effect on the functional properties and energy harvesting performance of Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics

Enhanced photo-piezo-catalytic properties of Co-doped Ba0.85Ca0.15Zr0.1(Ti1-xCox)0.9 ferroelectric ceramics for dye degradation

Effect of lithium carbonate on the sintering, microstructure, and functional properties of sol–gel‐derived Ba0.85Ca0.15Zr0.1Ti0.9O3 piezoceramics

Enhanced Curie temperature and superior temperature stability by site selected doping in BCZT based lead-free ceramics

Efficient enhancement of piezo-catalytic activity of BaTiO 3 -based piezoelectric ceramics via phase boundary engineering

Investigation of the structural and functional properties of lead-free barium calcium zirconate titanate piezoceramics

Impact of Ca 2+ and Zr 4+ substitution on mechanical energy harvesting response of lead-free BaTiO 3 piezoceramics with thermally stable storage density and efficiency

Enhanced Piezoelectric Response of (ba,ca)(ti, Zr)O3 Ceramics by Super Large Grain Size and Construction of Phase Boundary

Orthorhombic-tetragonal phase coexistence and enhanced piezoelectric properties at room temperature in Zn and Ta modified (Ba0.95Ca0.05)(Zr0.05Ti0.95)O3 ceramics through the synergistic effect of lattice distortion

Influences of rare earth site engineering on piezoelectric and electromechanical response of (Ba0.85Ca0.15) (Zr0.1Ti0.9)O3 lead-free ceramics

Piezoelectric and Dielectric Properties of (Bi0.5na0.5)tio3-Ba (Zr0.04ti0.96)o-3 Lead-Free Piezoelectric Ceramics

High Pressure Structural Investigation on Lead-Free Piezoelectric $0.5Ba(Ti_{0.8}Zr_{0.2})O_3$-$0.5(Ba_{0.7}Ca_{0.3})TiO_3$

Synthesis, Structure, Dielectric, Piezoelectric, and Energy Storage Performance of (ba0.85ca0.15)(ti0.9zr0.1)o3 Ceramics Prepared by Different Methods

Modified process engineering at morphotropic phase boundary for enhanced grain size and piezoelectric response in lead free BZT-BCT

Enhanced ferroelectric and piezoelectric responses of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics by Tm3+ amphoteric substitution

Large Piezoelectric Coefficient with Enhanced Thermal Stability in Nb5+-doped Ba0.85Ca0.15Zr0.1Ti0.9O3 Ceramics