Reverse Size Effect of the Unconfined Compressive Strength of Crystalline Rock: A Grain-Scale Perspective

Qinyuan Liang,Hengxing Lan,Yu Zhou,Bo Li,Weifeng Sun,Shijie Liu,Wenjun Lv

DOI: https://doi.org/10.1007/s00603-024-04216-7

IF: 6.518

2024-11-22

Rock Mechanics and Rock Engineering

Abstract:Due to the size effect, it is essential to first determine the mechanical parameters of experimental-scale rocks and then select appropriate models to extrapolate to the engineering scale for engineering design. Although extensive research have been conducted on the size effect of rocks, the mechanism for the observed strength reverse size effect of crystalline rock is still unclear. In this study, a series of unconfined compressive tests were conducted on the granite samples with different diameters and same slenderness ratio. Then, a grain-scale model containing joints and micro fissures was established specifically for the granite samples to capture the progressive failure behavior that contributes to the observed reverse size effect. It was verified that the numerical model can well-reproduce the observed reverse size effect, which first increases and then decreases with the increasing size. Based on the grain-scale simulation, the size effect was primarily controlled by crack propagation paths, crystal fracture strength, and the influence of pre-existing joints and micro fissures. Specifically, the ascending stage of the strength size effect was governed by the shorter crack path after crack initiation along weak planes (such as pre-existing micro fissures and weak boundaries). The occurrence of the inflection point in the strength size effect was attributed to the increased contribution of intergranular shear strength, resulting in widespread failure. After exceeding the inflection point, the strength decreased due to the localized failure along pre-existing joints.

geosciences, multidisciplinary,engineering, geological