Abstract:Silicon -based ultra -thin flat heat pipes (UFHPs) that can be integrated with semiconductor devices provide an opportunity for electronic thermal management. To meet the requirements of various operation states, the impacts of gravity on the liquid plug characteristics and heat transfer performance of an UFHP are investigated by a visualization experiment conducted at different incline angles. Condensate flows back through microgrooves under the capillary pressure and gravity under a low heating power (capillary flow stage), and then excess condensate flows back along the edges of the UFHP under a higher heating power (gravitational flow stage). Over a certain heating power ( Q >= 14 W), liquid plug fluctuations caused by vapor entrainment are observed with periodic dry -out at the evaporator under large incline angles ( alpha >= 60 degrees ), corresponding to temperature fluctuations. Intense fluctuations of the liquid plug enhance sensible heat transfer, although the liquid plug occupies the condenser area and impedes the vapor flow. Meanwhile, evaporation at the evaporator benefits from corner -film evaporation until a large area of dry -out occurs. Due to the increased gravity and buoyancy, a larger incline angle is conducive to thermal performance enhancement, but this effect becomes restricted as the heating power rises. At a cooling -water temperature of 20 degrees C and an incline angle of 90 degrees , the lowest thermal resistances of the UFHP yield a value of 1.14 degrees C/W at 4 W in the steady stage and a value of 1.22 degrees C/W at 18 W in the fluctuation stage, respectively. The heat transfer limit of UFHP with overfilling reaches 24 W, compared with the theoretical heat transfer capacity of 8.9 W at an incline angle of 90 degrees . Additionally, a higher cooling -water temperature is beneficial for the thermal performance in the capillary flow stage, but not in the gravitational flow stage and fluctuation stage. This study provides guidance for the operational design of silicon -based UFHP for electronic thermal management.

Study on heat transfer characteristics of a dual-evaporator ultra-thin loop heat pipe for laptop cooling

Simulation of Steady-State Operation of an Ejector-Assisted Loop Heat Pipe with a Flat Evaporator for Application in Electronic Cooling

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Power-saving Exploration for High-End Ultra-Slim Laptop Computers with Miniature Loop Heat Pipe Cooling Module

Experimental Study on Loop Heat Pipe with Flat Evaporator at Different Tilt Angles

Experimental investigation for the loop heat pipe with a bifacial flat evaporator

Experimental study on a rectangular evaporator loop heat pipe with a phase-change material heat sink

Numerical simulation of flattened heat pipe with double heat sources for CPU and GPU cooling application in laptop computers

Experimental study on the thermal performance of a liquid-cooled heat sink integrating heat pipes for dual CPU servers

Numerical Study on Heat Propagation in Laptop Cooling System

Experimental investigation on the start-up performance of a novel flat loop heat pipe with dual evaporators

Study of a new thin flat loop heat pipe for electronics

Experimental investigation on the thermal performance of a novel loop heat pipe (LHP) with micro-channel structure

Experimental investigation on thermal performance of ultra-thin flattened heat pipe with middle heating for electronics cooling

Liquid Plug Characteristics and Heat Transfer Performance of a Silicon-Based Ultra-Thin Flat Heat Pipe at Different Incline Angles

Operating characteristics of a dual flat-evaporator loop heat pipe for single heat source cooling in any orientation

Comparative Study on Thermal Performance of Ultrathin Miniature Loop Heat Pipes with Different Internal Wicks

Visualization study of a flat confined loop heat pipe for electronic devices cooling

Study of Heat Dissipation Characteristics of Loop Heat Pipe with Heat Sink of Composite Material

An experimental study of a novel high-performance heat pipe for chip cooling of desktop computer

Heat Transfer Capacity Optimization Design of Microgroove and Microcolumn in an Ultra-Thin Flat Heat Pipe