Abstract:Hard carbons hold the most promising practical application among all anode materials for sodium-ion batteries. However, the low initial Coulombic efficiency (ICE) limits their further commercialization. Herein, one kind of hard carbon with Intensified graphitization induced by graphene oxide was prepared by a new coupled carbonization strategy, in which the mixture of phenolic resin (PF) and grapheme oxide (GO) was heat-treated at high temperature directly. The as-prepared hard carbon exhibited outstanding electrochemical behaviors such as superior ICE. We also believe that the strategy may provide a constructive instruction for high performance hard carbon material designing. For synthesis of hard carbon (GHCs), GO aqueous suspension was first prepared via a modified Hummer’s method. Then PF was dissolved in the GO aqueous suspension (mass ratio of PF:GO was 50:1 to 200:1). The slurry was cured and dried at 120 °C, and further carbonized above 1000 °C. With increasing mass ratios of GO to PF, the interlayer distance of carbon decreased from 3.88 Å to 3.70 Å, less than 3.93 Å of pure PF, suggesting that the addition of graphene oxide may enhance the graphitization of PF derived carbon. La and Lc of GHCs also increased accordingly with the increasing of GO proportion, indicating the development of graphitic microcrystallite. C1s X-ray photoelectron spectra showed that, the sp2 C content of GHCs increased from 48.4% to 54.5%, which was several time larger than the pure contribution from physical addition of graphene theoretically (from 0.5% to 2%, corresponding to the mass ratio of PF:GO from 200:1 to 50:1 ). From HRTEM and SAED images, a signiﬁcant improvement of short-range ordering degree can be clearly detected with the increasing of GO content. Those results were so consistent, indicating that GO gives an effcient induced local graphitization in hard carbon. The sodium storage performances of GHCs were characterized in a half cells with metal Na as the counter electrode, using 1.0 M NaPF6 in ethylene carbonate /dimethyl carbonate (1/1 in volume) as the electrolyte. As-prepared hard carbon delivered a superior ICE over 90%, high reversible capacity of 343 mAh/g and excellent cycling performance beyond 150 cycles with a capacity retention over 90%. This may be due to the characteristics of GHCs with less defective and lower surface area , especially with the Intensified local graphitization induced by graphene oxide. Figure 1

Sucrose-derived hard carbon wrapped with reduced graphene oxide as a high-performance anode for sodium-ion batteries

Graphene inducing graphitization: Towards a hard carbon anode with ultrahigh initial coulombic efficiency for sodium storage

Hard Carbon/graphene Microfibers As a Superior Anode Material for Sodium-Ion Batteries

High temperature induced abundant closed nanopores for hard carbon as high-performance sodium-ion batteries anodes

Graphene-coated micro/nanostructure hard carbon with improved electrochemical performance for sodium-ion battery

Scalable synthesis of N/S co-doped hard carbon microspheres as a high-performance anode material for sodium-ion batteries

Graphene Inducing Graphitization:Towards a Hard Carbon Anode with Ultrahigh Initial Coulombic Efficiency for Sodium Storage

Sulfur-doping biomass based hard carbon as high performance anode material for sodium-ion batteries

A Strongly Coupled CoS2/ Reduced Graphene Oxide Nanostructure As an Anode Material for Efficient Sodium-Ion Batteries

Low-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent

Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteries

Hard Carbon Microsphere with Built-In Electron Transport Channels as a High-Performance Anode for Sodium-Ion Batteries

The construction of CuCo2O4/N-doped reduced graphene oxide hybrid hollow spheres as anodes for sodium-ion batteries

Coupled Carbonization Strategy towards Advanced Hard Carbon for High Energy Sodium-Ion Battery.

Ultra-fine SnO2 nanocrystals anchored on reduced graphene oxide as a high-performance anode material for sodium-ion batteries

Engineering Ultrathin Carbon Layer on Porous Hard Carbon Boosts Sodium Storage with High Initial Coulombic Efficiency.

Development of electrode architecture using Sb–rGO composite and CMC binder for high-performance sodium-ion battery anodes

Coupled Carbonization Strategy toward Advanced Hard Carbon for High-Energy Sodium-Ion Battery

Pyridinic N‐Dominated Hard Carbon with Accessible Carbonyl Groups Enabling 98% Initial Coulombic Efficiency for Sodium‐Ion Batteries

Extra Sodiation Sites in Hard Carbon for High Performance Sodium Ion Batteries

Hard Carbon Microsphere with Expanded Graphitic Interlayers Derived from a Highly Branched Polymer Network as Ultrahigh Performance Anode for Practical Sodium-Ion Batteries