Abstract:Hard carbons hold the most promising practical application among all anode materials for sodium-ion batteries. However, the low initial Coulombic efficiency (ICE) limits their further commercialization. Herein, one kind of hard carbon with Intensified graphitization induced by graphene oxide was prepared by a new coupled carbonization strategy, in which the mixture of phenolic resin (PF) and grapheme oxide (GO) was heat-treated at high temperature directly. The as-prepared hard carbon exhibited outstanding electrochemical behaviors such as superior ICE. We also believe that the strategy may provide a constructive instruction for high performance hard carbon material designing. For synthesis of hard carbon (GHCs), GO aqueous suspension was first prepared via a modified Hummer’s method. Then PF was dissolved in the GO aqueous suspension (mass ratio of PF:GO was 50:1 to 200:1). The slurry was cured and dried at 120 °C, and further carbonized above 1000 °C. With increasing mass ratios of GO to PF, the interlayer distance of carbon decreased from 3.88 Å to 3.70 Å, less than 3.93 Å of pure PF, suggesting that the addition of graphene oxide may enhance the graphitization of PF derived carbon. La and Lc of GHCs also increased accordingly with the increasing of GO proportion, indicating the development of graphitic microcrystallite. C1s X-ray photoelectron spectra showed that, the sp2 C content of GHCs increased from 48.4% to 54.5%, which was several time larger than the pure contribution from physical addition of graphene theoretically (from 0.5% to 2%, corresponding to the mass ratio of PF:GO from 200:1 to 50:1 ). From HRTEM and SAED images, a signiﬁcant improvement of short-range ordering degree can be clearly detected with the increasing of GO content. Those results were so consistent, indicating that GO gives an effcient induced local graphitization in hard carbon. The sodium storage performances of GHCs were characterized in a half cells with metal Na as the counter electrode, using 1.0 M NaPF6 in ethylene carbonate /dimethyl carbonate (1/1 in volume) as the electrolyte. As-prepared hard carbon delivered a superior ICE over 90%, high reversible capacity of 343 mAh/g and excellent cycling performance beyond 150 cycles with a capacity retention over 90%. This may be due to the characteristics of GHCs with less defective and lower surface area , especially with the Intensified local graphitization induced by graphene oxide. Figure 1

Graphene-coated micro/nanostructure hard carbon with improved electrochemical performance for sodium-ion battery

Hard Carbon/graphene Microfibers As a Superior Anode Material for Sodium-Ion Batteries

Sucrose-derived hard carbon wrapped with reduced graphene oxide as a high-performance anode for sodium-ion batteries

Graphene inducing graphitization: Towards a hard carbon anode with ultrahigh initial coulombic efficiency for sodium storage

Facile synthesis of free-standing, flexible hard carbon anode for high-performance sodium ion batteries using graphene as a multi-functional binder

Design of hard carbon anode with low specific surface area and low porosity in sodium ion battery

Micro-nano structure hard carbon as a high performance anode material for sodium-ion batteries

Hierarchically Porous Hard Carbon with Graphite Nanocrystals for High-Rate Sodium Ion Batteries with Improved Initial Coulombic Efficiency

Graphene Inducing Graphitization:Towards a Hard Carbon Anode with Ultrahigh Initial Coulombic Efficiency for Sodium Storage

Development of electrode architecture using Sb–rGO composite and CMC binder for high-performance sodium-ion battery anodes

High temperature induced abundant closed nanopores for hard carbon as high-performance sodium-ion batteries anodes

Hard Carbon Coated Nano-Si/graphite Composite As a High Performance Anode for Li-ion Batteries

Scalable synthesis of N/S co-doped hard carbon microspheres as a high-performance anode material for sodium-ion batteries

N-doped catalytic graphitized hard carbon for high-performance lithium/sodium-ion batteries

Regulation of Surface Oxygen Functional Groups and Pore Structure of Bamboo-Derived Hard Carbon for Enhanced Sodium Storage Performance

A novel synthesis of Nb2O5@rGO nanocomposite as anode material for superior sodium storage

A V2O5-nanosheets-coated Hard Carbon Fiber Fabric As High-Performance Anode for Sodium Ion Battery

Improved sodium storage properties of nickel sulfide nanoparticles decorated on reduced graphene oxide nanosheets as an advanced anode material

Ion-Catalyzed Synthesis of Microporous Hard Carbon Embedded with Expanded Nanographite for Enhanced Lithium/Sodium Storage

Carbon coated Sn/SnO2 nanoparticles filmed on multilayer graphene for high-performance sodium ion batteries

Regulating Pseudo‐Graphitic Domain and Closed Pores to Facilitate Plateau Sodium Storage Capacity and Kinetics for Hard Carbon