Abstract:The performance of the CFRP–steel interface is crucial to the reinforcement efficiency of the steel structures strengthened by using externally pasted CFRP sheet method; while it is influenced significantly by adhesive properties and geometrical characteristics of joints. The present study aims to optimize the adhesive layer of the CFRP–steel interface and establish a theoretical model of predicting the interfacial behaviors of the optimized CFRP–steel joints. A commercially available adhesive was modified by addition of Nano-SiO2 ranged from 0 to 7wt% to ascertain the optimal content of Nano-SiO2. A series of tensile tests were carried out on dog-bone adhesive specimens, single-lap shear specimens and CFRP–steel double-lap joints to obtain the mechanical properties of the adhesive at different content of nanofiller and the corresponding bond–slip laws in the unmodified and modified CFRP–steel interfaces. Accordingly, theoretical models were derived to predict the load capacity of the joints and the bond stress distribution along the CFRP–steel interface during different loading phases. The results show that the mechanical properties of the adhesive are improved with the addition of nano-SiO2 up to 1.4 wt%. When the content of nano-SiO2 rises from 1.4 to 7 wt%, the tensile and shear strengths as well as the tensile modulus decline gradually whereas the ductility keeps growing with a lower growth rate. These indicate the nano-SiO2 content of 1.4 wt% is favorable. Both the peak stress and the load capacity of the CFRP–steel joint increase with the adhesive thickness varying from 0.5 to 1 mm. The bond–slip law of the unmodified CFRP–steel interface can be simplified to be bilinear, regardless of the adhesive thickness and curing duration. In contrast, the modified interface presents a trilinear curve due to the special plastic plateau caused by the filling of nano-SiO2. Consequently, a larger fracture toughness and a higher load capacity can be reached by the optimized joints. The theoretical results are in agreement with the experimental phenomena and results. The modified adhesive is beneficial to utilize the CFRP material better and improve the reinforcement efficiency.

Research on the Bonding Performance of the CFRP-Concrete Interface Based on Colloid Thermosensitivity

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Experimental study on dynamic behavior of CFRP-to-steel interface

Dynamic Bond Behavior Of Gfrp Sheet-Concrete Interface Under Impact Loading

Effect of Moderately Elevated Temperatures on Bond Behaviour of CFRP-to-steel Bonded Joints Using Different Adhesives

Effect of chloride penetration on CFRP sheet, CFRP‐concrete interface, and CFRP‐strengthened concrete beams

Experimental and theoretical study on mechanical behaviors of CFRP–steel interface

Durability Performances of Carbon Fiber-Reinforced Polymer and Concrete-Bonded Systems under Moisture Conditions

Numerical analysis for influence of adhesive thickness on the interfacial properties of CFRP-concrete

Long-Term Performance of External Bonding under Moisture and Temperature Effects

Experimental and 3D Numerical Study on CFRP–Concrete Interface Under Dynamic Loading

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Improving bonding performance of PCM-concrete interface under elevated temperatures by using different adhesives

Investigation on Concrete-Pcm Interface under Elevated Temperature: at Material Level and Member Level

Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures

Thermal effects on the fracture of adhesively bonded composite-concrete interface

Fracturing behaviors of FRP-strengthened concrete structures

Temperature-Dependent Interfacial Debonding and Frictional Behavior of Fiber-Reinforced Polymer Composites

Bond Behavior of CFRP-to-steel Bonded Joints at Different Service Temperatures: Experimental Study and FE Modeling

Influence of Roughness on Shear Bonding Performance of CFRP-Concrete Interface

Study on bonding behavior of FRP grid-ECC composite layer and concrete with quantitative interface treatment