Abstract:Carbonate precipitation, as part of the carbon dioxide (CO2) mineralization process, is generally regarded as a high-temperature, high-pressure, and high-purity CO2 process. Typical conditions consist of temperatures around 120 °C and a pressure of 100 bar of pure CO2, making the process costly. A major challenge facing carbonate precipitation is performing the reaction at low temperatures and low partial pressures of CO2 (pCO2) such as 25 °C and CO2 flue gas concentration. In this work, we investigated the effect of carbonic anhydrase (CA) to favor magnesium (Mg) carbonate precipitation at low temperatures and low pCO2. CA is an enzyme that accelerates CO2 hydration promoting its conversion into HCO3- and then CO32-. This increases supersaturation with respect to Mg-carbonates. A geochemical model was implemented and used to identify supersaturated conditions with respect to Mg-carbonates. Tests were run at 25, 40, and 50 °C and at 1 bar of either pure CO2 or 10 vol% CO2 and 90 vol% N2. The concentration of 10 vol% CO2 was chosen to resemble CO2 concentration in flue gas. In selected tests, the CA enzyme was added directly as bovine CA or through microalgae (Scenedesmus obliquus). Experiments were run for 48 hours; 24 hours to reach equilibrium, then another 24 hours until the supersaturated conditions were established. After 48 hours the experiments were interrupted and the solids were characterized. Results show that the addition of CA, either directly or through Scenedesmus obliquus, enhances Mg-carbonate precipitation. Regardless of the temperature, the precipitates were made entirely of nesquehonite (MgCO3-3H2O) when pure CO2 was used. Otherwise, a solid solution containing brucite (Mg(OH)2) and MgCO3-3H2O was formed. Overall, these findings suggest that CA can promote carbonate precipitation at low temperatures, pressures, and CO2 purity. The enzyme is effective when added directly or supplied through microalgae, opening up the possibility for a CO2 mineralization process to be implemented directly at a combustion plant as a CO2 storage option without preliminary CO2 capture.

Reaction Layer Formation on MgO in the Presence of Humidity

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Reaction of Mg2+ on the surface of silica in adsorption layer

Exploring Mechanisms of Hydration and Carbonation of MgO and Mg(OH)2 in Reactive Magnesium Oxide-based Cements

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Activation of CO2 and CH4 on MgO surfaces: mechanistic insights from first-principles theory

Accurate Descriptions of Molecule-Surface Interactions for Understanding CO2 Capture by MgO-based Sorbents in Wet Conditions

Unveiling the dynamic CO2 capture performance of MgO promoted with molten salts and CaCO3 via fixed bed reactor experiments

Enhanced mineral carbonation on surface functionalized MgO derived from mine tailings

Revealing the Role of MgO in Sorption‐Enhanced Water Gas Shift Reaction for H2 Production: A DFT Study

Mesoporous MgO Promoted with NaNO3/NaNO2 for Rapid and High-Capacity CO2 Capture at Moderate Temperatures

Synthesis of Elevated Temperature CO2 Adsorbents from Aqueous Miscible Organic-Layered Double Hydroxides

Enhanced precipitation of magnesium carbonates using carbonic anhydrase

CO2 Absorption and Magnesium Carbonate Precipitation in MgCl2–NH3–NH4Cl Solutions: Implications for Carbon Capture and Storage

Optimising the acid–base ratio of Mg–Al layered double oxides to enhance CO 2 capture performance: the critical role of calcination conditions

MgO promoted by Fe2O3 and nitrate molten salt for fast and enhanced CO2 capture: Experimental and DFT investigation

Bryophyte-Bioinspired Nanoporous AAO/C/MgO Composite for Enhanced CO2 Capture: The Role of MgO

Basic Properties of MgAl-Mixed Oxides in CO2 Adsorption at High Temperature