Experimental and numerical characterization of single-phase pressure drop and heat transfer enhancement in helical corrugated tubes
Gonçalo G. Cruz,Miguel A.A. Mendes,Jos M.C. Pereira,H. Santos,A. Nikulin,Ana S. Moita
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121632
IF: 5.2
2021-11-01
International Journal of Heat and Mass Transfer
Abstract:<p>The internal flow in corrugated tubes of different helical pitch, covering from the laminar to turbulent regime, was studied in order to characterize the three-dimensional flow and the influence of corrugation geometry on pressure drop and convective heat transfer. With water as working fluid and an imposed wall heat flux, ranging from around 4 to 33 kW/m<span class="math"><math>2</math></span>, a numerical model was developed with a CFD commercial software, where <span class="math"><math>k−ω</math></span> SST was used to model turbulence. Experimental tests were performed covering Reynolds numbers in the range from around 300 up to 5000, which allowed to identify the transition region and validate the numerical model. The results show that due to the swirl induced by the corrugation, the critical Reynolds number for the start of transition to turbulent flow is reduced. The thermal performance factor, which quantifies the heat transfer enhancement at the expense of pressure drop, was used to compare the corrugated tubes against the reference case of smooth tube. Based on this, all investigated corrugated geometries performed better than the smooth tube, except for low Reynolds numbers (<span class="math"><math>Re<500</math></span>) in the laminar regime. Overall, the corrugated tube with the lowest pitch showed a clearly better performance for the intermediate range of Reynolds numbers (<span class="math"><math>1000</math></span>), being an optimal choice for a wider range of operating conditions in the transitional and turbulent flow regimes.</p>
engineering, mechanical,thermodynamics,mechanics