Abstract:In recent years, montmorillonite (Mt) has started to be used as a carrier for catalysts and widely utilized inexpensive adsorbent due to its unique structure. However, the used Mt might cause solid-waste pollution without proper dispose. In order to realize the resource utilization of solid waste, a new strategy for preparing high-performance catalysts was proposed using waste Mt-based materials as precursor, providing a new way to reuse abandoned Mt materials. In this study, the waste Mt was obtained by using iron hydroxide oxide (FeOOH) and hexadecylpyridinium chloride (CPC) to simulate the process of adsorption of contaminants (tetracycline, TC) on the montmorillonite composite. The iron oxide/Carbon-Montmorillonite (Fe/C-Mt) composite catalysts were successfully prepared at 700 °C pyrolysis temperature, reconstructing metal and carbon catalytic sites on Mt through the conversion of FeOOH to Fe3O4 and the organic precursors to graphite carbon. According to the investigation of catalytic performances, the sample after pyrolysis of montmorillonite modified by FeOOH, CPC and TC (Fe/CPC/TC-Mt-p) was determined as the optimum catalyst to activate peroxymonosulfate (PMS), and reaching the degradation efficiency of 96.2% in this oxidation system to treat target pollutants (ofloxacin, OFL). The increase of catalyst dosage and PMS concentration promoted the degradation effect of OFL, while initial pH and anionic species in the solution had little effect. Meanwhile, the synergistic effect of metal and carbon catalytic sites enables this system to have high oxidation activity. Here, Fe/CPC/TC-Mt-p/PMS system was developed with accelerating the generation of 1O2, making 1O2 the major reactive oxygen species for OFL degradation. In addition, Fe/CPC/TC-Mt-p catalyst has good stability, and could reach the initial degradation level of OFL after being regenerated by high temperature pyrolysis. This study provides a novel routine to applications of waste mineral materials and improving treatment efficiency of antibiotic wastewater through PMS activation.

Fabrication of reactive flat-sheet ceramic membranes for oxidative degradation of ofloxacin by peroxymonosulfate

Preparation of Catalytic Ceramic Nanofiber Membranes with MnFe Dual-Active Sites Enhancing Catalytic Ozonation of Sulfamethoxazole

Ceramic nanofiber membrane anchoring nanosized Mn<sub>2</sub>O<sub>3</sub> catalytic ozonation of sulfamethoxazole in water

Catalytic Ceramic Nanofiber Membrane Coupled with Ozonation for Degradation of Sulfamethoxazole: Critical Parameters, Mechanisms and Applicability

CuFeS2/MXene-Modified Polyvinylidene Fluoride Membrane for Antibiotics Removal Through Peroxymonosulfate Activation

Fabrication of Catalytic Ceramic Nanofiber Membrane with High Permeability and Superior Catalytic Performance

Heterogeneous Activation of Peroxymonosulfate Using Ordered Mesoporous Co 3 O 4 for the Degradation of Chloramphenicol at Neutral Ph

CuFe2O4 supported on montmorillonite to activate peroxymonosulfate for efficient ofloxacin degradation

Activation of peroxymonosulfate by a stable Co-Mg-Al LDO heterogeneous catalyst for the efficient degradation of ofloxacin

Ceramic membrane with double catalytic layer for efficient peroxymonosulfate activation and dissolved organic matter (DOM) membrane fouling control

Walnut Shell Loaded with Cobalt Ferrite as Efficient Peroxymonosulfate Activator to Degrade Ofloxacin

Development of CuCo 2 O 4 integrated ceramic membrane for peroxymonosulfate activation: An efficient oxidation process for bisphenol A degradation

Durable fluorinated cobalt oxyhydroxide/calcium alginate hydrogels for activating peroxymonosulfate to enable nearly 100% degradation of ciprofloxacin

Facile synthesis of CoFeAl-layered double hydroxides activated by peroxymonosulfate for enhanced ciprofloxacin degradation

Preparation of Fe/C-Mt composite catalyst and ofloxacin removal by peroxymonosulfate activation

Layered metal oxides loaded ceramic membrane activating peroxymonosulfate for mitigation of NOM membrane fouling

Activation of peroxymonosulfate for ciprofloxacin degradation by a novel oxygen-deficient CoTiO 3 /TiO 2 NTs/Ti composite catalytic membrane:Electron transfer pathway and underlying mechanism

Efficient Degradation of Ofloxacin by Magnetic CuFe2O4 Coupled PMS System: Optimization, Degradation Pathways and Toxicity Evaluation

MOF-derived FeCo carbon nanomaterials with abundant oxygen vacancies as highly efficient peroxymonosulfate catalyst for ciprofloxacin degradation

Fabrication of Fe-CoTiO 3 /TiO 2 /Ti catalytic membrane for peroxymonosulfate activation to efficient sulfamethoxazole degradation

Assembling CoAl-layered Metal Oxide into the Gravity-Driven Catalytic Membrane for Fenton-like Catalytic Degradation of Pharmaceuticals and Personal Care Products