Dynamic fragmentation of microwave irradiated rock

Shuai Wang,Ying Xu,Kaiwen Xia,Tianyang Tong

DOI: https://doi.org/10.1016/j.jrmge.2020.09.003

IF: 5.915

2021-04-01

Journal of Rock Mechanics and Geotechnical Engineering

Abstract:An SHPB system with momentum-trap technique is used to simulate rock fragmentation.Damage due to irradiation is quantified by P-wave velocity and micro-CT scanning.The dynamic UCS exhibits both loading rate and irradiation duration dependency.Based on the fragment size distribution, three fragmentation types are proposed.The coupled effect of irradiation and loading rate on fragmentation is uncovered.The microwave-assisted rock fragmentation has been proven to be a promising approach to reducing cutting tools wear and improving efficiency in rock excavation and crushing. Understanding the influence of microwave irradiation induced damage on rock fragmentation is thus desirable. In this work, cylindrical Fangshan granite (FG) specimens are exposed to microwave irradiation with a power of 6kW for durations up to 4.5 minutes. The irradiation induced damage of the specimens is quantified using both X-ray micro-CT scanning and ultrasonic wave measurement. The CT value and P-wave velocity decrease with the increase of the irradiation duration. The irradiated specimens are then tested using a split Hopkinson pressure bar (SHPB) system to simulate rock fragmentation. A momentum-trap technique is utilized to ensure single pulse loading to the specimen in SHPB tests, enabling valid fragment size distribution analysis. The dependence of dynamic uniaxial compressive strength (UCS) on the irradiation duration and the loading rate is revealed. The dynamic UCS increases with the loading rate while decreases with the increase of the irradiation duration. Using the sieve analysis, three fragmentation types are proposed based on the fragment size distribution, which are dictated by both the loading rate and the irradiation duration. In addition, an average fragment size is proposed to quantify the fragment size distribution. The results show that the average fragment size decreases with the loading rate. A loading rate range is identified, where the dramatic reduction of the average fragment size occurs. The dependence of fragmentation on the irradiation and loading rate is also discussed.

engineering, geological