Microwave-Assisted Linear Cutting of Sandstone with a Conical Pick: Experimental Study
Yixin Zhao,Chuncheng Sun,Yirui Gao,Sen Gao,Jinbao Guo,Ronghuan Xie,Xiaodong Guo
DOI: https://doi.org/10.1007/s00603-024-04225-6
IF: 6.518
2024-10-25
Rock Mechanics and Rock Engineering
Abstract:As an efficient, green and energy-saving technique, microwave has shown great development prospects for assisting mechanical rock breaking due to its ability to reduce rock strength and even damage rock. To address the problems of low excavation efficiency and severe tool wear during hard rock excavation, high-power microwave was applied to assist the pick breaking the rock in this study. In addition, the heating, fracturing, and the cutting effect of the rock under different microwave parameters were analyzed. The conclusions were as follows: firstly, the rock temperature is positively correlated with microwave power, irradiation time, water content and the number of cycles. The surface temperature of the rock was categorized into a high-temperature zone, sub-high-temperature zone and low temperature zone after microwave irradiation. Secondly, rocks exhibited macroscopic cracks, causing rock blocks to peel off, resulting in fracture zones after microwave irradiation. These were correlated with the temperature zones on the rock surface. Finally, the auxiliary mechanical cutting effect of microwave was analyzed and evaluated. The average cutting force ( F mean ) and the maximum cutting force ( F max ) of the rock decreased after microwave irradiation. Moreover, the length, width, and depth of the cutting groove also confirmed the great effect of microwave-assisted mechanical rock breaking. This study provides valuable insights for the practical application of microwave-assisted mechanical rock breaking in the field.
geosciences, multidisciplinary,engineering, geological