Study on the failure criterion for extreme service conditions of polyurethane bonded structures

Hongli Chen,Dengfeng Wang,Xiaopeng Zhang,Jingxin Na,Xin Chen,Fei Lou

DOI: https://doi.org/10.1016/j.ijadhadh.2023.103453

IF: 3.848

2023-08-01

International Journal of Adhesion and Adhesives

Abstract:In this paper, we establish a failure criterion for aluminum alloy polyurethane bonded joints under extreme service conditions. Firstly, we analyze the mechanical properties of the bonded joints at different service temperatures after exposure to a hygrothermal environment, and determine the extreme service conditions (120 aging cycles and 80 °C service temperature) of the bonded joints based on their changing trends. We then construct a finite element model of the bonded joint using ABAQUS software, and divide the four corner points of the adhesive layer into failure areas. We extract the stresses of the adhesive elements in these areas, linearly combine them, and check if the combined stresses satisfy the screening conditions. The combined stresses that meet the conditions are defined as the allowable equivalent stresses [ σ e q ] . Finally, to check the validity of the failure criterion, we embed it in the finite element model and compare it with mechanical experiments. The results show that the failure criteria can accurately simulate the failure process of bonded joints and can be used to calibrate the strength of bonded joints, providing a useful reference for joint strength design.

materials science, multidisciplinary,engineering, chemical