Abstract:Antimony sulfide (Sb2S3) and thin crystalline silicon (c-Si) are considered suitable top- and bottom-cell candidates for tandem solar cells (TSCs), owing to their natural abundance, non-toxicity, cost-competitiveness, and complementary bandgaps. The current work proposes and investigates a two-terminal (2T) monolithic Sb2S3/Si thin film TSC via TCAD simulation. The Sb2S3 cell, with a bandgap of 1.7 eV, is utilized as a top sub-cell, and the bottom sub-cell is utilized by a thin c-Si cell having a bandgap of 1.12 eV. The calibrated standalone top and bottom cells provide a power conversion efficiency (η) of 4.31% and 14.26%, respectively. Upon incorporating the two cells into a 2T Sb2S3/Si monolithic TSC, the resultant tandem cell achieves an η of 10.10% implying that the top cell should be optimized in order to get a tandem efficiency higher than the bottom cell. Thus, the Sb2S3 cell is optimized by designing the cell without the organic hole transport layer (HTL) (resulting in an np heterojunction) and engineering the conduction band offset (CBO) between the electron transport layer (ETL) and the Sb2S3 absorber. Then, the tandem structure is optimized starting from the ETL thickness and doping concentration. Also, the impact of changing the absorber defect density and the series resistance of the top cell on the TSC performance is investigated to demonstrate the maximum available η. At reduced defect density and series resistance, the overall efficiency of the tandem cell is improved to 19.51%. Furthermore, we explored the impact of top and bottom absorber thicknesses on TSC working metrics. At the designed matching point, the tandem efficiency is enhanced to 23.25%, and J sc also boosts to 17.24 mA/cm2. The simulation study is intended to provide a tandem configuration that is based on an all-thin-film design which may be suitable for applications like wearable electronics due to its flexibility. All TCAD simulations are performed using the Silvaco Atlas simulator under standard one Sun (AM1.5G, 1000 W/m2) illumination.

Monolithic Two-Terminal Tandem Solar Cells Using Sb 2 S 3 and Solution-Processed PbS Quantum Dots Achieving an Open-Circuit Potential beyond 1.1 V

Toward high-efficiency solution-processed tandem solar cells

Si Solid-State Quantum Dot-Based Materials for Tandem Solar Cells.

Perovskite/Colloidal Quantum Dot Tandem Solar Cells: Theoretical Modeling and Monolithic Structure

All-inorganic Sb2S3-based Two-terminal Tandem Solar Cells Enable over 10.9% Efficiency Employing a Concise Interconnection Layer

Two-Terminal Tandem Solar Cells based on Perovskite and Transition Metal Dichalcogenides

Design and Simulation of a‐Si:H/PbS Colloidal Quantum Dots Monolithic Tandem Solar Cell for 12% Efficiency

Solution Processed Infrared- and Thermo- Photovoltaics based on 0.7 eV Bandgap PbS Colloidal Quantum Dots

Design and analysis of Sb2S3/Si thin film tandem solar cell

Toward Full Solution Processed Perovskite/Si Monolithic Tandem Solar Device With PCE Exceeding 20%

Ambient Stable and Efficient Monolithic Tandem Perovskite/PbS Quantum Dots Solar Cells via Surface Passivation and Light Management Strategies

Monolithic Organic/Colloidal Quantum Dot Hybrid Tandem Solar Cells via Buffer Engineering

Colloidal Quantum Dot Tandem Solar Cells Using CVD Graphene as An Atomically Thin Intermediate Recombination Layer

Optimization of Perovskite/Colloidal Quantum Dot Monolithic Tandem Solar Cell to Enhance Device Performance via Solar Cell Capacitance Simulator 1D

Planar Heterojunction Solar Cell Employing a Single-Source Precursor Solution-Processed Sb2S3 Thin Film as the Light Absorber

Spectral Splitting Solar Cells Constructed with InGaP/GaAs Two-Junction Subcells and Infrared PbS Quantum Dot/ZnO Nanowire Subcells

Solution-Processed Monolithic All-Perovskite Triple-Junction Solar Cells with Efficiency Exceeding 20%

Quasi-conformal Monolithic N-I-p Perovskite/c-Si Tandem Solar Cells with Light Management Strategies Exceed 28% Efficiency

Exploring the potential of standalone and tandem solar cells with Sb2S3 and Sb2Se3 absorbers: a simulation study

Solution Processed Polymer–Inorganic Semiconductor Solar Cells Employing Sb2S3 as a Light Harvesting and Electron Transporting Material

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction