Abstract:Antimony sulfide (Sb2S3) and thin crystalline silicon (c-Si) are considered suitable top- and bottom-cell candidates for tandem solar cells (TSCs), owing to their natural abundance, non-toxicity, cost-competitiveness, and complementary bandgaps. The current work proposes and investigates a two-terminal (2T) monolithic Sb2S3/Si thin film TSC via TCAD simulation. The Sb2S3 cell, with a bandgap of 1.7 eV, is utilized as a top sub-cell, and the bottom sub-cell is utilized by a thin c-Si cell having a bandgap of 1.12 eV. The calibrated standalone top and bottom cells provide a power conversion efficiency (η) of 4.31% and 14.26%, respectively. Upon incorporating the two cells into a 2T Sb2S3/Si monolithic TSC, the resultant tandem cell achieves an η of 10.10% implying that the top cell should be optimized in order to get a tandem efficiency higher than the bottom cell. Thus, the Sb2S3 cell is optimized by designing the cell without the organic hole transport layer (HTL) (resulting in an np heterojunction) and engineering the conduction band offset (CBO) between the electron transport layer (ETL) and the Sb2S3 absorber. Then, the tandem structure is optimized starting from the ETL thickness and doping concentration. Also, the impact of changing the absorber defect density and the series resistance of the top cell on the TSC performance is investigated to demonstrate the maximum available η. At reduced defect density and series resistance, the overall efficiency of the tandem cell is improved to 19.51%. Furthermore, we explored the impact of top and bottom absorber thicknesses on TSC working metrics. At the designed matching point, the tandem efficiency is enhanced to 23.25%, and J sc also boosts to 17.24 mA/cm2. The simulation study is intended to provide a tandem configuration that is based on an all-thin-film design which may be suitable for applications like wearable electronics due to its flexibility. All TCAD simulations are performed using the Silvaco Atlas simulator under standard one Sun (AM1.5G, 1000 W/m2) illumination.

Exploring the potential of standalone and tandem solar cells with Sb2S3 and Sb2Se3 absorbers: a simulation study

All Antimony Chalcogenide Tandem Solar Cell

Dual-Absorber Solar Cell Design and Simulation Based on Sb2Se3 and CZTGSe for High-Efficiency Solar Cells

Enhancing efficiency of Sb2Se3 solar cell through optimized optical and electrical properties with Bi-layer absorber

Design and analysis of Sb2S3/Si thin film tandem solar cell

Concurrent investigation of antimony chalcogenide (Sb2Se3 and Sb2S3)-based solar cells with a potential WS2 electron transport layer

Sb2Se3 as a bottom cell material for efficient perovskite/Sb2Se3 tandem solar cells

Theoretical Insight into High‐Efficiency Triple‐Junction Tandem Solar Cells via the Band Engineering of Antimony Chalcogenides

Numerical simulation of Sb2Se3-based solar cells

Thermally Deposited Sb2Se3/CdS-Based Solar Cell: Experimental and Theoretical Analysis

Bifacial and Semitransparent Sb2(S,Se)3 Solar Cells for Single‐Junction and Tandem Photovoltaic Applications

A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells

Numerical Simulation of the Performance of Sb2Se3 Solar Cell via Optimizing the Optoelectronic Properties Based SCAPS-1D

Proposal and Numerical Analysis of Organic/Sb2Se3 All-Thin-Film Tandem Solar Cell

Numerical modeling of CuSbSe2-based dual-heterojunction thin film solar cell with CGS back surface layer

ZnxCd1–xSySe1–y as an effective electron transport layer for improving the efficiency of Sb2S3 and Sb2Se3 thin-film solar cells

Development of Antimony Sulfide–selenide Sb2(S, Se)3-based Solar Cells

All-inorganic Sb2S3-based Two-terminal Tandem Solar Cells Enable over 10.9% Efficiency Employing a Concise Interconnection Layer

CuIn(Se,Te)2 absorbers with bandgaps < 1 eV for bottom cells in tandem applications

CuSbSe2 As a Potential Photovoltaic Absorber Material: Studies from Theory to Experiment

Numerical optimization of inorganic p-Sb2Se3/n-ZrS2 heterojunction solar cells: achieving high efficiency through SCAPS-1D simulation