Abstract:By employing a graded-interfaces model based on a generalized formalism for interface-roughness (IFR) scattering that was modified for mid-infrared emitting quantum cascade lasers (QCLs), we have accurately reproduced the electro-optical characteristics of published record-performance 4.9 μm- and 8.3 μm-emitting QCLs. The IFR-scattering parameters at various interfaces were obtained from measured values and trends found via atom-probe tomography analysis of one of our 4.6 μm-emitting QCL structures with variable barrier heights. Those values and trends, when used for designing a graded-interface, 4.6 μm-emitting QCL, led to experimental device characteristics in very good agreement with calculated ones. We find that the published record-high performance values are mainly due to both injection from a prior-stage low-energy (active-region) state directly into the upper-laser ( ul ) level, thus at low field-strength values, as well as to strong photon-induced carrier transport. However, the normalized leakage-current density J leak / J is found to be quite high: 26–28 % and 23.3 %, respectively, mainly because of IFR-triggered shunt-type leakage through high-energy active-region states, in the presence of high average electron temperatures in the ul laser level and an energy state adjacent to it: 1060 K and 466 K for 4.9 μm- and 8.3 μm-emitting QCLs, respectively. Then, modeling with graded interfaces becomes a tool for designing devices of performances superior to the best reported to date, thus closing in on fundamental limits. The model is employed to design a graded-interface 8.1 μm-emitting QCL with suppressed carrier leakage via conduction-band engineering, which reaches a maximum front-facet wall-plug efficiency value of 22.2 %, significantly higher than the current record (17 %); thus, a value close to the fundamental front-facet, upper limit (i.e., 25 %) for ∼8 μm-emitting QCLs.

Surface-Emitting Quantum-Cascade Lasers with a Grating Formed by Focused Ion Beam Milling

Single-lobe, Surface-Normal Beam Surface Emission from Second-Order Distributed Feedback Lasers with Half-Wave Grating Phase Shift

Second-Order Distributed Feedback Quantum Cascade Lasers at 7.8μm

Index-Coupled Surface Porous Grating Distributed Feedback Quantum Cascade Laser

Single-Mode Surface-Emitting Concentric-Circular-Grating Terahertz Quantum Cascade Lasers

High Power Surface Metal Grating Distributed Feedback Quantum Cascade Lasers Emitting at Lambda Similar to 8.3 Mu M

Surface Emitting Quantum Cascade Laser Arrays

Design and Characteristics of Photonic Crystal Resonators for Surface-Emitting Quantum Cascade Lasers

Wavelength-Stable Metal Grating Distributed Feedback Quantum Cascade Laser Emitting at Λ ~ 7.2 Μm

Low Divergence Single-Mode Surface-Emitting Concentric-Circular-Grating Terahertz Quantum Cascade Lasers

Quantum Cascade Surface Emitting Lasers

Surface-Emitting Terahertz Quantum-Cascade Laser with 170 Mw Output Power in a Single Lobed Beam

Microring quantum cascade surface emitting lasers

High-Power and Low-Threshold-Current-Density GaAs/AlGaAs Quantum Cascade Lasers

Room temperature surface emission on large-area photonic crystal quantum cascade lasers

Single-mode, surface-emitting quantum cascade laser at 26 μ m

Modeling with graded interfaces: Tool for understanding and designing record-high power and efficiency mid-infrared quantum cascade lasers

Stable Single-Mode Operation of Distributed Feedback Quantum Cascade Laser under High Current Via a Grating Reflector

Realization of GaAs/AlGaAs quantum-cascade lasers with high average optical power

GaAs/AlGaAs quantum cascade lasers

Emission characteristics of surface second-order metal grating distributed feedback semiconductor lasers