Ignition characteristics of single coal particles under ammonia co-firing conditions

Chenlin Chen,Zhihua Wang,Yong He,Wubin Weng,Kefa Cen
DOI: https://doi.org/10.1016/j.combustflame.2024.113385
IF: 4.4
2024-02-28
Combustion and Flame
Abstract:To meet the goal of an international carbon-neutral framework, the promotion of clean coal utilization occupies a vital position in reducing greenhouse gas emissions. Ammonia co-firing is considered as a potential strategy for future power generation to reduce fossil energy consumptions, soot, CO 2 emissions, and hydrocarbon pollutants. In the present work, the ignition characteristics of single coal particles under ammonia (NH 3 ) co-firing conditions were investigated. Particles were injected with NH 3 or N 2 into a hot flue gas environment at 1550 K generated by a CH 4 -fired Hencken burner. Temporally resolved images of CH* chemiluminescence and char thermal radiation were captured. Combining the signal profiles, ignition modes and characteristic times of single burning particles were studied with different coal types, carrying atmospheres, and O 2 contents. When the carrier gas was replaced by NH 3 atmosphere, the ignition delay time of all coal particles was greatly shortened, and the time interval from ignition to peak, as well as the combustible component burnout time, were both lengthened due to the promoted devolatilization and combustion reaction rates of coal particles caused by the NH 3 flame. Concerning the ignition mode in the NH 3 -blended cases, the homogeneous ignition behaviors of the lignite particles were further enhanced, while the bituminous particles transitioned to the homogeneous-heterogeneous united ignition mode. As the O 2 content in the flue gas increased, the ignition of all coal particles was advanced monotonously, and the chemiluminescence became more intense in both N 2 and NH 3 atmospheres.
energy & fuels,engineering, chemical, mechanical,thermodynamics, multidisciplinary
What problem does this paper attempt to address?