Abstract:Mussel-inspired polydopamine (PDA) can serve as building blocks and interfaces in designing functional materials. Here, the use of PDA as an interlayer between polyaniline (PANi) and multidimensional carbon materials, such as graphene quantum dots (GQD), multiwalled carbon nanotubes (MWCNT), and graphene nanosheets (GNS), to improve the thermoelectric performance of p-type polymer-based materials has been reported. The introduction of PDA promotes the carrier mobility of GQD/PDA/PANi, CNT/PDA/PANi, and GNS/PDA/PANi ternary composites due to the superior adhesive property of PDA. An optimal conductivity of 4.98 × 104 S m–1 and a power factor of 92.17 μW m–1 K–2 at 363 K are achieved in GNS/PDA/PANi, which are much higher than the values of GNS/PDA and GNS/PANi. More surprisingly, despite the fact that GQD/PDA, CNT/PDA, and GNS/PDA binary composites show p-type properties, the pyrolysis treatment of GQD/PDA, CNT/PDA, and GNS/PDA at 800 °C results in a gain in both the electrical conductivity and negative Seebeck coefficient of c-GQD/PDA, c-CNT/PDA, and c-GNS/PDA. The c-CNT/PDA composites possess the highest Seebeck value of −30.2 μV K–1 and a maximum power factor value of 35.57 μW m–1 K–2. Finally, a flexible thermoelectric generator with 24 thermoelectric units composed of GNS/PDA/PANi and c-CNT/PDA is demonstrated, which gives an output voltage of 52.8 mV at a temperature difference of 60 °C.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01457?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01457</a>.Thermal conductivity measurements and TE characterization; electrical conductivity and Seebeck coefficient of all the samples at 303, 333, and 363 K; TE properties of pristine GQD, CNT, and GNS at 363 K; FTIR spectra, XPS spectra, TEM images, and size distributions of GQD; appearance of GNS dispersion solution and GNS/PDA dispersion solution in water after ultrasonication; carrier mobility and carrier concentration of PANi-based composites at 363 K; PF and thermal conductivity of PDA and PDA-based composite materials at 363 K; PF and thermal conductivity of PANi-based binary composites at 363 K; digital photos of n-type composite films of bending 150 and 180° and after bending 180°; cross-sectional SEM images of n-type composite films of bending 180° and magnification times; digital photos showing bending of p-type composite films by 150 and 180° and after bending to 180°; cross-sectional SEM images showing the bending of p-type composite films by 180° and magnification times; and schematic diagram of the device configuration and the working principle of TEG (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01457/suppl_file/am1c01457_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-performance n-type Ta 4 SiTe 4 /polyvinylidene fluoride (PVDF)/graphdiyne organic–inorganic flexible thermoelectric composites

High-performance N-Type Ta4SiTe4/polyvinylidene Fluoride (pvdf)/graphdiyne Organic-Inorganic Flexible Thermoelectric Composites

Tailoring P-N Conversion in All-solid-state Polymer Composites with A Record Ionic Thermopower

Flexible Thermoelectric Films Based on Bi2Te3 Nanosheets and Carbon Nanotube Network with High n-Type Performance

Benzothienobenzothiophene‐Based Organic Charge Transfer Complex and Carbon Nanotube Composites for p‐Type and n‐Type Thermoelectric Materials and Generators

High performance polypyrrole/SWCNTs composite film as a promising organic thermoelectric material

Novel Hybrid p- and n-Type Organic Thermoelectric Materials Based on Mussel-Inspired Polydopamine

Flexible N-Type Thermoelectric Materials by Organic Intercalation of Layered Transition Metal Dichalcogenide TiS2.

Layered Bi2Se3 nanoplate/polyvinylidene fluoride composite based n-type thermoelectric fabrics

High-Performance thermoelectric generator based on n-Type flexible composite and its application in Self-Powered temperature sensor

High performance of p-type and n-type thermoelectric materials based on liquid crystal mixture and single-walled carbon nanotube composites

The Enhanced Thermoelectric and Mechanical Performance of Polythiophene/Single-Walled Carbon Nanotube Composites with Polar Ethylene Glycol Branched-Chain Modifications

Thermoelectric Materials: High Thermoelectric Performance in n‐Type Perylene Bisimide Induced by the Soret Effect (Adv. Mater. 45/2020)

Flexible N-Type Thermoelectric Composites Based on Non-Conductive Polymer with Innovative Bi2Se3-CNT Hybrid Nanostructured Filler

Role of interfaces in organic–inorganic flexible thermoelectrics

High-performance g-C 3 N 4 coated single-walled carbon nanotube composite films for flexible thermoelectric generators

N-Type Flexible Films and a Thermoelectric Generator of Single-Walled Carbon Nanotube-Grafted Tin Selenide Nanocrystal Composites

Flexible n-type thermoelectric composite films with enhanced performance through interface engineering and post-treatment

p-Type PVA/MWCNT-Sb2Te3 Composites for Application in Different Types of Flexible Thermoelectric Generators in Combination with n-Type PVA/MWCNT-Bi2Se3 Composites

Vertically Designed High-Performance and Flexible Thermoelectric Generator Based on Optimized PEDOT:PSS/SWCNTs Composite Films

Enhanced Thermoelectric and Mechanical Performance of Fully Conjugated Block Polythiophene Modified with Polar Ethylene Glycol Side Chains/Single-Walled Carbon Nanotube Composite Materials