Abstract:Mussel-inspired polydopamine (PDA) can serve as building blocks and interfaces in designing functional materials. Here, the use of PDA as an interlayer between polyaniline (PANi) and multidimensional carbon materials, such as graphene quantum dots (GQD), multiwalled carbon nanotubes (MWCNT), and graphene nanosheets (GNS), to improve the thermoelectric performance of p-type polymer-based materials has been reported. The introduction of PDA promotes the carrier mobility of GQD/PDA/PANi, CNT/PDA/PANi, and GNS/PDA/PANi ternary composites due to the superior adhesive property of PDA. An optimal conductivity of 4.98 × 104 S m–1 and a power factor of 92.17 μW m–1 K–2 at 363 K are achieved in GNS/PDA/PANi, which are much higher than the values of GNS/PDA and GNS/PANi. More surprisingly, despite the fact that GQD/PDA, CNT/PDA, and GNS/PDA binary composites show p-type properties, the pyrolysis treatment of GQD/PDA, CNT/PDA, and GNS/PDA at 800 °C results in a gain in both the electrical conductivity and negative Seebeck coefficient of c-GQD/PDA, c-CNT/PDA, and c-GNS/PDA. The c-CNT/PDA composites possess the highest Seebeck value of −30.2 μV K–1 and a maximum power factor value of 35.57 μW m–1 K–2. Finally, a flexible thermoelectric generator with 24 thermoelectric units composed of GNS/PDA/PANi and c-CNT/PDA is demonstrated, which gives an output voltage of 52.8 mV at a temperature difference of 60 °C.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01457?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01457</a>.Thermal conductivity measurements and TE characterization; electrical conductivity and Seebeck coefficient of all the samples at 303, 333, and 363 K; TE properties of pristine GQD, CNT, and GNS at 363 K; FTIR spectra, XPS spectra, TEM images, and size distributions of GQD; appearance of GNS dispersion solution and GNS/PDA dispersion solution in water after ultrasonication; carrier mobility and carrier concentration of PANi-based composites at 363 K; PF and thermal conductivity of PDA and PDA-based composite materials at 363 K; PF and thermal conductivity of PANi-based binary composites at 363 K; digital photos of n-type composite films of bending 150 and 180° and after bending 180°; cross-sectional SEM images of n-type composite films of bending 180° and magnification times; digital photos showing bending of p-type composite films by 150 and 180° and after bending to 180°; cross-sectional SEM images showing the bending of p-type composite films by 180° and magnification times; and schematic diagram of the device configuration and the working principle of TEG (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01457/suppl_file/am1c01457_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thermoelectric Materials: High Thermoelectric Performance in n‐Type Perylene Bisimide Induced by the Soret Effect (Adv. Mater. 45/2020)

High Thermoelectric Performance of a Sc2Si2Te6 Monolayer at Medium Temperatures: an Ab Initio Study.

Advances in n‐Type Organic Thermoelectric Materials and Devices

High‐Performance Organic Thermoelectric Materials: Theoretical Insights and Computational Design

Thermoelectrics: Ultra‐High Thermoelectric Performance in Bulk BiSbTe/Amorphous Boron Composites with Nano‐Defect Architectures (Adv. Energy Mater. 41/2020)

Doping optimization of organic-inorganic hybrid perovskite CH3NH3PbI3 for high thermoelectric efficiency

Thermoelectric Materials by Organic Intercalation

Thermoelectrics: p‐Type Plastic Inorganic Thermoelectric Materials (Adv. Energy Mater. 23/2021)

Field‐Effect Transistors: Low‐Symmetry PdSe 2 for High Performance Thermoelectric Applications (Adv. Funct. Mater. 52/2020)

Enhancing the Performance of N‐Type Thermoelectric Devices via Tuning the Crystallinity of Small Molecule Semiconductors

Recent Developments of n‐Type Organic Thermoelectric Materials: Influence of Structure Modification on Molecule Arrangement and Solution Processing

Flexible N-Type Thermoelectric Materials by Organic Intercalation of Layered Transition Metal Dichalcogenide TiS2.

In situ crystal-amorphous compositing inducing ultrahigh thermoelectric performance of p-type Bi0.5Sb1.5Te3 hybrid thin films

New Thermoelectric Material and Devices: Naphthol[1,3]oxazine and the Performance Compared with Bismuth Telluride

A Thermally Activated And Highly Miscible Dopant For N-Type Organic Thermoelectrics

Transparent Charge Transfer Complex with High Thermoelectric Performance

Hybrid Organic–Inorganic Thermoelectric Materials and Devices

Novel Hybrid p- and n-Type Organic Thermoelectric Materials Based on Mussel-Inspired Polydopamine

Ion Exchange Induced Efficient N‐Type Thermoelectrics in Solid‐State

Flexible Organic Thermoelectric Materials and Devices for Wearable Green Energy Harvesting

High performance of p-type and n-type thermoelectric materials based on liquid crystal mixture and single-walled carbon nanotube composites