Improvement of dye and protein filtration efficiency using modified PES membrane with 2-mercaptoethanol capped zinc sulfide quantum dots

Mohammad Reza Ganjali,Mohammed A. Al‐Naqshabandi,Bagher Larijani,Alireza Badiei,Vahid Vatanpour,Hamid Reza Rajabi,Hamidreza Rezania,Shadi Paziresh,Ghader Mahmodi,Seok-Jhin Kim,Mohammad Reza Saeb

DOI: https://doi.org/10.1016/j.cherd.2020.12.026

IF: 4.119

2021-04-01

Chemical Engineering Research and Design

Abstract:Synthesis of zinc sulfide (ZnS) quantum dots (QDs) by simple precipitation method.ZnS QDs were embedded in polyethersulfone (PES) composite nanofiltration membrane.Antifouling properties and dye separation performance were improved.FRR was improved greatly from 52.6% for bare PES to 87.9% for 2 wt.% QDs membrane.In this work, novel 2-mercaptoethanol capped zinc sulfide (ZnS) quantum dots (QDs) embedded polyethersulfone (PES) nanocomposite membranes were fabricated with improved antifouling properties and dye separation performance. A simple water-based precipitation approach was used to obtain 2-mercaptoethanol capped ZnS QDs at ambient temperature. The resultant membranes were fully identified with SEM, AFM, ATR-FTIR porosity and contact angle analyses. The developed nanostructure membranes exhibited a remarkable fouling reduction in bovine serum albumin (BSA) protein filtration featured by a declined average surface roughness. The flux recovery ratio (<em>FRR</em>) was improved considerably from 52.6% for the neat PES to 87.9% for nanocomposite membrane by inserting 2 wt.% ZnS QDs. The contact angle of membrane reduced, while porosity enlarged by an increase in the QDs loading. The prepared nanocomposite membranes have shown an increased Reactive Red 195 rejection (from 91.3% to 96.1%) and an enlarged water and dye solution flux (from 121 to 163 L m⁻² h⁻¹) with respect to the bare PES membrane. Thus, the results proved the potential efficiency of the novel QDs/PES membrane for the dye separation applications.

engineering, chemical