Abstract:Solidification conditions and cooling rate can significantly affect the microstructure and the mechanical properties of Nickel-based superalloy GH4169 components repaired by laser direct energy deposition (L-DED). In this work, we employ inter-channel dwell time in the l-DED repairment of GH4169 superalloy groove in order to control the thermal cycles during deposition, thus regulating the microstructure and tensile properties of repaired GH4169 groove. The tensile properties of materials repaired by using different inter-channel dwell times were compared by tensile tests with digital image correlation (DIC) technique, and the microstructure and fracture mechanism were also investigated by scanning electron microscope (SEM). Results show that the dendrite structure, grain size of recrystallization, primary dendrite arm spacing, distribution of Laves and γ'' phases of the repaired material are significantly different under different inter-channel dwell times of 0 s, 4 s, 8 s and the associated different thermal cycles. The content of the Laves phases is lower, the grain size is smaller and distribution of γ'' phases are relatively uniform with the additional dwell time of 8 s. Owing to the difference in microstructure, the tensile strengths of both the repaired material and the substrate material increase with the increase of inter-channel dwell time. Moreover, the repaired GH4169 materials exhibit similar or even higher tensile strength than that of the substrate GH4169 material. Besides, due to the uneven precipitation of Nb element in repaired material and the associated change of Laves phases and carbides, the measured elongations of the substrate are larger than those of the repaired materials. The changes in microstructure under varying dwell times also lead to differences in strain localization and strain hardening exponent of the repaired materials. The present study paved a novel way to achieve high-quality repair of superalloys via laser direct energy deposition.

Effect of the elevated temperature on the wear behavior of Laser Metal Deposition IN718 repairs

Exploring elevated temperature fretting wear behaviour of wrought and laser powder bed fusion IN718 superalloy

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

Enhancing high-temperature performance of Inconel 718 LDED samples through hybrid laser polishing post-treatment

Microstructure and Mechanical Properties of IN718 on 42crmo for Repair Applications by Laser Directed Energy Deposition

Microstructure and mechanical properties at elevated temperatures of as-built and heat-treated Inconel 718 produced through laser powder bed fusion processes

Influence of Heat Treatment on Fretting Wear Behavior of Laser Powder Bed Fusion Inconel 718 Alloy

Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion

Tribological Behaviors of LDED Inconel 718 Samples Polished with a Hybrid Laser Polishing Technique

Effect of heat treatment on microstructures and mechanical properties of Inconel 718 additively manufactured using gradient laser power

The Effect of Aging Heat Treatments on Room and High-Temperature Wear Performance of the Inconel 718TM Manufactured by Laser Powder Bed Fusion

Heat Treatment Design for IN718 by Laser Metal Deposition with High Deposition Rates: Modeling, Simulation, and Experiments

Effect of Microstructure Evolution and Phase Precipitations on Hot Corrosion Behavior of IN718 Alloy Subjected to Multiple Laser Shock Peening

Influence of laser power on microstructure and high-temperature tribological properties of CoAlTiWTa RHEA coating on Inconel 718 superalloy

The effect of temperature during plasma nitriding on the properties of IN718 additively manufactured by laser beam powder bed fusion

The Effect of Precipitates on the Stress Rupture Properties of Laser Powder Bed Fusion Inconel 718 Alloy

A comparative tribological study on as-cast and heat-treated Inconel-718 superalloy at elevated temperature

The effect of interval pulsed laser deposition on the microstructure and mechanical properties of Inconel 718 parts using laser directed energy deposition

Laser Powder Deposition of a Fe-Ni-Cr Superalloy: Analysis of Microstructure Formation and Mechanical Properties

The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy