Abstract:Electrical properties and electro-thermal behavior were studied in composites with carbon black (CB) or hybrid filler (CB and graphite) and a matrix of linear low-density polyethylene (LLDPE). LLDPE, a (co)polymer with low crystallinity but with high structural regularity, was less studied for Positive Temperature Coefficient (PTC) applications, but it would be of interest due to its higher flexibility as compared to HDPE. Structural characterization by scanning electron microscopy (SEM) confirmed a segregated structure resulted from preparation by solid state powder mixing followed by hot molding. Direct current (DC) conductivity measurements resulted in a percolation threshold of around 8% (w) for CB/LLDPE composites. Increased filler concentrations resulted in increased alternating current (AC) conductivity, electrical permittivity and loss factor. Resistivity-temperature curves indicate the dependence of the temperature at which the maximum of resistivity is reached (Tmax(R)) on the filler concentration, as well as a differentiation in the Tmax(R) from the crystalline transition temperatures determined by DSC. These results suggest that crystallinity is not the only determining factor of the PTC mechanism in this case. This behavior is different from similar high-crystallinity composites, and suggests a specific interaction between the conductive filler and the polymeric matrix. A strong dependence of the PTC effect on filler concentration and an optimal concentration range between 14 and 19% were also found. Graphite has a beneficial effect not only on conductivity, but also on PTC behavior. Temperature vs. time experiments, revealed good temperature self-regulation properties and current and voltage limitation, and irrespective of the applied voltage and composite type, the equilibrium superficial temperature did not exceed 80 °C, while the equilibrium current traversing the sample dropped from 22 mA at 35 V to 5 mA at 150 V, proving the limitation capacities of these materials. The concentration effects revealed in this work could open new perspectives for the compositional control of both the self-limiting and interrupting properties for various low-temperature applications.

Polarization-Induced Temperature Self-Sensing and Self-Powering Behavior of Carbon–Carbon Composites

The electric self-heating behavior of carbon black loaded high density polyethylene composites

High temperature co-polyester thermoplastic elastomer nanocomposites for flexible self-regulating heating devices

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

e temperature coe ffi cient behavior of the high-density polyethylene composites with multi-dimensional carbon fi llers and their use for temperature-sensing resistors †

Enhanced positive temperature coefficient behavior of the high-density polyethylene composites with multi-dimensional carbon fillers and their use for temperature-sensing resistors

Polarization Mechanism Underlying Strongly Enhanced Dielectric Permittivity in Polymer Composites with Conductive Fillers

Cyclic thermoresistivity of resin-based carbon fiber bars modified with mixed carbon powder and nano-silica

Characterization of Ultralow Thermal Conductivity in Anisotropic Pyrolytic Carbon Coating for Thermal Management Applications

Potential temperature sensing of oriented carbon-fiber filled composite and its resistance memory effect

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

The Electric Self-Heating Behavior of Graphite-Filled High-Density Polyethylene Composites

Self-powered Infrared Detector Enabled by Interfacial Anchoring and Thermal Reinforcement

Investigation Of Microstructure And Conductive Mechanism Of High Density Polyethylene/Carbon Black Particle Composite By Positron Annihilation Lifetime Spectroscopy

Development of Carbon Nanotubes–Graphene–Polydimethylsiloxane Composite Film with Excellent Electrothermal Performance

Regulation of Interfacial Polarization and Local Electric Field Strength Achieved Highly Energy Storage Performance in Polyetherimide Nanocomposites at Elevated Temperature via 2D Hybrid Structure

Pyroresistive Properties of Composites Based on HDPE and Carbon Fillers

Pyroelectricity in poled all-organic polar polynorbornene/polydimethylsiloxane-based stretchable electrets

Toward Self-Powered Sensing and Thermal Energy Harvesting in High-Performance Composites Via Self-Folded Carbon Nanotube Honeycomb Structures.

Studies on Preparation and Thermal Control Behavior of Hybrid Fillers/binary-Polymer Composites with Positive Temperature Coefficient Characteristic

Electro- and photo-thermal energy conversion investigation of polyethylene glycol infiltrated porous carbon aerogels