Abstract:Because of the superiority in high theoretical capacity and environmental friendliness, SnO2 as an ideal anode material exhibits an application prospect in sodium-ion batteries. Nevertheless, its practical use is restricted by the poor electroconductivity and huge volume expansion. To solve these difficulties, a maneuverable and effective strategy is introduced to synthesis SnO2/C composites in this work. For the operation, the composites are prepared via a one-pot hydrothermal technique. For the effect, SnO2 particles disperse uniformly on the pitch-derived carbon matrix in nanometer size. The impacts of the pyrolysis temperature and SnO2 content are investigated in detail. It is surprising that the diameter of the SnO2 particle is ∼5 nm observed by high-resolution transmission electron microscopy, and the Sn–O–C bond exists, confirmed by X-ray photoelectron spectroscopy. In comparison to the carbonaceous substrate and pure SnO2, the composite shows higher storage capacity and greater cycle performance that SnO2/C-2 delivers a charge specific capacity of 311.8 mAh g–1 at 100 mA g–1 initially and a residual capacity of 144.2 mAh g–1 after 1000 cycles at 500 mA g–1. The remarkable electrochemical performance benefits from the nanosized SnO2 particles with high dispersion as well as the tight link between SnO2 and the carbon matrix.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00887?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00887</a>.SEM images of MTP and ACM (Figure S1), water contact angle of MTP and ACM (Figure S2), high-resolution XPS spectra of SnO2 powder (Figure S3), SEM images of the SnO2/C-2 electrode before and after 100 cycles (Figure S4), cycling performance of SnO2/C-2 at 0.5 A g–1 for 100 cycles (Figure S5), CV curves and charge/discharge curves of ACM-500 (Figure S6), and EIS spectra of the SnO2/C-2 anode before and after cycle (Figure S7) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00887/suppl_file/ef1c00887_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improve the Electrochemical Performance of Na 2 Ti 3 O 7 Nanorod through Pitch Coating

Building a Stable Plateau-Type Na2Ti3O7 Anode Interface Toward Advanced Sodium-Ion Batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Carbon Coated Sodium-Titanate Nanotube As an Advanced Intercalation Anode Material for Sodium-Ion Batteries

Sodium Titanate Nanorods Decorated with Silver Nanoparticles as a High-Performance Anode Material for Sodium-Ion Batteries

The Recent Progress of Pitch Nanoengineering to Obtain the Carbon Anode for High-Performance Sodium Ion Batteries

Double-Enhanced Core-Shell-Shell Sb 2 S 3 /Sb@TiO 2 @C Nanorod Composites for Lithium- and Sodium-Ion Batteries

Nanoscale surface modification of P2-type Na0.65[Mn0.70Ni0.16Co0.14]O2 cathode material for high-performance sodium-ion batteries

Boosting the Rate Capability of Multichannel Porous TiO2 Nanofibers with Well-Dispersed Cu Nanodots and Cu2+-doping Derived Oxygen Vacancies for Sodium-Ion Batteries

Size Controlling and Surface Engineering Enable NaTi2(PO4)3/C Outstanding Sodium Storage Properties

Uniform Nano-SnO 2 /C Composite Anodes from Coal Tar Pitch for Sodium-Ion Batteries

A High Rate and Long Cycling Performance NaTi2(PO4)3 Core–Shell Porous Nanosphere Anode for Aqueous Sodium‐Ion Batteries

Promoting the performances of NaTi2(PO4)3 electrode for sodium ion battery by reasonable crystal design and surface modification

Nitrogen-doped carbon decorated TiO2/Ti3C2T MXene composites as anode material for high-performance sodium-ion batteries

Na+-Conductive Na2Ti3O7-Modified P2-type Na2/3Ni1/3Mn2/3O2 Via a Smart in Situ Coating Approach: Suppressing Na+/Vacancy Ordering and P2-O2 Phase Transition

Improved Na storage and Coulombic efficiency in TiP2O7@C microflowers for sodium ion batteries

Innovative Multielement Modification of Pitch-Derived Two-Dimensional Carbon Nanosheets as Anodes for Superior Performance Sodium-Ion Batteries

Synthesis of CoSe2 nanoparticles embedded in N-doped carbon with conformal TiO2 shell for sodium-ion batteries

Core‐Shell Se‐Doped TiO2@Carbon Nanotubes for High‐Performance Sodium‐Ion Batteries

Self-doping of Ti3+ into Na2Ti3O7 Increases Both Ion and Electron Conductivity As a High-Performance Anode Material for Sodium-Ion Batteries

Creating porous texture on Ti3C2Tx for enhanced sodium-ion battery anode