Uniform Nano-SnO 2 /C Composite Anodes from Coal Tar Pitch for Sodium-Ion Batteries

Yaoyu Li,Ruifeng Liu,Chunlei Wang,Ying Zhou

DOI: https://doi.org/10.1021/acs.energyfuels.1c00887

2021-04-29

Abstract:Because of the superiority in high theoretical capacity and environmental friendliness, SnO₂ as an ideal anode material exhibits an application prospect in sodium-ion batteries. Nevertheless, its practical use is restricted by the poor electroconductivity and huge volume expansion. To solve these difficulties, a maneuverable and effective strategy is introduced to synthesis SnO₂/C composites in this work. For the operation, the composites are prepared via a one-pot hydrothermal technique. For the effect, SnO₂ particles disperse uniformly on the pitch-derived carbon matrix in nanometer size. The impacts of the pyrolysis temperature and SnO₂ content are investigated in detail. It is surprising that the diameter of the SnO₂ particle is ∼5 nm observed by high-resolution transmission electron microscopy, and the Sn–O–C bond exists, confirmed by X-ray photoelectron spectroscopy. In comparison to the carbonaceous substrate and pure SnO₂, the composite shows higher storage capacity and greater cycle performance that SnO₂/C-2 delivers a charge specific capacity of 311.8 mAh g^–1 at 100 mA g^–1 initially and a residual capacity of 144.2 mAh g^–1 after 1000 cycles at 500 mA g^–1. The remarkable electrochemical performance benefits from the nanosized SnO₂ particles with high dispersion as well as the tight link between SnO₂ and the carbon matrix.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00887?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00887</a>.SEM images of MTP and ACM (Figure S1), water contact angle of MTP and ACM (Figure S2), high-resolution XPS spectra of SnO₂ powder (Figure S3), SEM images of the SnO₂/C-2 electrode before and after 100 cycles (Figure S4), cycling performance of SnO₂/C-2 at 0.5 A g^–1 for 100 cycles (Figure S5), CV curves and charge/discharge curves of ACM-500 (Figure S6), and EIS spectra of the SnO₂/C-2 anode before and after cycle (Figure S7) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00887/suppl_file/ef1c00887_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

energy & fuels,engineering, chemical