Abstract:Sulfonamide antibiotics (SAs) are typical antibiotics and have attracted increasing concerns about their wide occurrence in environment as well as potential risk for human health. In this study, we applied a novel advanced oxidation process in SAs degradation by combining molybdenum sulfide and peracetic acid (MoS2/PAA). Reactive oxygen species (ROS) including HO●, CH3C(O)O●, CH3C(O)OO●, and 1O2 were generated from PAA by MoS2 activation and contributed to SAs degradation. The effects of initial pH, the dosages of PAA and MoS2, and humic acid for SAs degradation were further evaluated by selecting sulfamethoxazole (SMX) as a target SA in the MoS2/PAA process. Results suggested that the optimum pH for SMX removal was 3, where the degradation efficiency of SMX was higher than 80% after reaction for 15 min. Increasing PAA (0.075 – 0.45 mM) or MoS2 (0.1 – 0.4 g/L) dosages facilitated the SMX degradation, while the presence of humic acids retarded the SMX removal. This MoS2/PAA process also showed good efficiencies in removing other SAs including sulfaguanidine, sulfamonomethoxine and sulfamerazine. Their possible degradation pathways were proposed based on the products identification and DFT calculation, showing that apart from the oxidation of amine groups to nitro groups in SAs, MoS2/PAA induced SO2 extrusion reaction for SAs that contained six-membered heterocyclic moieties.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: to develop a new advanced oxidation process (AOP) for the efficient degradation of sulfonamide antibiotics (SAs) by combining molybdenum disulfide (MoS₂) and peracetic acid (PAA). Specifically, the research aims to reveal how MoS₂ activates PAA to generate reactive oxygen species (ROS), and to evaluate the degradation efficiency of this process under different conditions, especially the degradation effect on sulfamethoxazole (SMX). ### Main research objectives: 1. **Reveal the activation mechanism of PAA**: Activate PAA through MoS₂ to generate reactive oxygen species (ROS), such as hydroxyl radical (HO●), acetyl radical (CH₃C(O)O●), peroxyacetyl radical (CH₃C(O)OO●) and singlet oxygen (¹O₂). 2. **Verify the degradation effect of the MoS₂/PAA process on SAs**: Select four commonly used sulfonamide antibiotics (sulfaguanidine, sulfamonomethoxine, sulfadimethoxine and sulfamethoxazole) as target pollutants and study their degradation paths in the MoS₂/PAA process. 3. **Evaluate influencing factors**: Further study the effects of PAA concentration, MoS₂ dosage, initial pH value and humic acid on the degradation of SMX. ### Research background: - **Environmental problems of sulfonamide antibiotics (SAs)**: SAs are widely used in humans and animal husbandry, but they are not easily degraded by biological methods in the environment, resulting in accumulation in water bodies and posing a threat to ecosystems and human health. - **Application of advanced oxidation processes (AOPs)**: AOPs are an effective method for removing SAs by generating highly reactive radicals (such as sulfate radical and hydroxyl radical) to degrade these antibiotics. - **Advantages of peracetic acid (PAA)**: As an emerging oxidant, PAA has high oxidizing ability and low disinfection by - product formation potential, and has received increasing attention in water treatment in recent years. ### Research methods: - **Experimental design**: Conduct batch experiments in a 250 - mL glass reactor, and study the degradation effect of SMX by adjusting parameters such as PAA and MoS₂ dosages and initial pH value. - **Analysis methods**: Use high - performance liquid chromatography (HPLC), fluorescence spectroscopy, electron paramagnetic resonance (ESR) and other techniques to detect the generated reactive oxygen species and degradation products. ### Main findings: - **Activation of PAA**: MoS₂ can effectively activate PAA to generate multiple reactive oxygen species, especially hydroxyl radical (HO●) and acetyl radical (CH₃C(O)O●). - **Degradation of SMX**: Under the optimal conditions (pH 3, PAA concentration 0.3 mM, MoS₂ dosage 0.3 g/L), the degradation efficiency of SMX exceeds 80% and is completed within 15 minutes. - **Influencing factors**: Increasing the PAA concentration or MoS₂ dosage can improve the degradation efficiency of SMX, while the presence of humic acid will inhibit the degradation process. ### Conclusion: This study has successfully developed a new MoS₂/PAA advanced oxidation process, which can efficiently degrade sulfonamide antibiotics. This process not only provides an effective solution for antibiotic pollution in the environment, but also provides new ideas for further research on the degradation of other organic pollutants.

Molybdenum disulfide (MoS2): A novel activator of peracetic acid for the degradation of sulfonamide antibiotics

Molybdenum disulfide (MoS2) promoted sulfamethoxazole degradation in the Fe(III)/peracetic acid process

Activated peracetic acid by Mn3O4 for sulfamethoxazole degradation: A novel heterogeneous advanced oxidation process

Novel Nonradical Oxidation of Sulfonamide Antibiotics with Co(II)-Doped g-C 3 N 4 -Activated Peracetic Acid: Role of High-Valent Cobalt–Oxo Species

Low additive peracetic acid enhanced sulfamethazine degradation by permanganate: A mechanistic study

Efficiently activate peroxymonosulfate by Fe3O4@MoS2 for rapid degradation of sulfonamides

Selective degradation of sulfonamide antibiotics by peracetic acid alone: Direct oxidation and radical mechanisms

Boosting activation of peracetic acid by Co@mZVI for efficient degradation of sulfamethoxazole: Interesting two-phase generation of reactive oxidized species

Ultra-adsorption enhancing peroxymonosulfate activation by ultrathin NiAl-layered double hydroxides for efficient degradation of sulfonamide antibiotics

Bimetallic metal-organic framework as a high-performance peracetic acid activator for sulfamethoxazole degradation

Copper oxide combing with multi-walled carbon nanotubes activated peroxyacetic acid for the degradation of sulfamethoxazole

Applying a novel advanced oxidation process of activated peracetic acid by CoFe2O4 to efficiently degrade sulfamethoxazole

Enhanced degradation of sulfamethoxazole by microwave-activated peracetic acid under alkaline condition: Influencing factors and mechanism

Remediation of sulfonamides-contaminated groundwater through in-situ activation of peroxymonosulfate by supported hierarchical CuO/MgO nanosheets

Co3O4-MnO2 nanoparticles moored on biochar as a catalyst for activation of peroxymonosulfate to efficiently degrade sulfonamide antibiotics

Efficient activation of peroxymonosulfate by MnS/Fe-MOF hybrid catalyst for sulfadiazine degradation: Synergistic effects and mechanism

Co-Mn spinel oxides trigger peracetic acid activation for ultrafast degradation of sulfonamide antibiotics: Unveiling critical role of Mn species in boosting Co activity

Enhancement in Sulfamethoxazole Degradation Via Efficient Heterogeneous Activation of Peracetic Acid by FeS

Degradation of antibiotics in aqueous media using manganese nanocatalyst-activated peroxymonosulfate

Thermal Activation of Peracetic Acid in Aquatic Solution: The Mechanism and Application to Degrade Sulfamethoxazole

Cu(II) assisted peroxymonosulfate oxidation of sulfonamide antibiotics: The involvement of Cu(III)