Abstract:Three-dimensional SAR imaging of urban buildings is currently a hotspot in the research area of remote sensing. Synthetic Aperture Radar (SAR) offers all-time, all-weather, high-resolution capacity, and is an important tool for the monitoring of building health. Buildings have geometric distortion in conventional 2D SAR images, which brings great difficulties to the interpretation of SAR images. This paper proposes a novel Rotating SAR (RSAR) mode, which acquires 3D information of buildings from two different angles in a single rotation. This new RSAR mode takes the center of a straight track as its rotation center, and obtains images of the same facade of a building from two different angles. By utilizing the differences in geometric distortion of buildings in the image pair, the 3D structure of the building is reconstructed. Compared to the existing tomographic SAR or circular SAR, this method does not require multiple flights in different elevations or observations from varying aspect angles, and greatly simplifies data acquisition. Furthermore, both simulation analysis and actual data experiment have verified the effectiveness of the proposed method.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: in Synthetic Aperture Radar (SAR) imaging, the traditional 2D SAR image cannot accurately reflect the real 3D information of buildings. In particular, the geometric distortion problem brings great difficulties to the interpretation of SAR images. To overcome these problems, the paper proposes an innovative Rotating SAR (RSAR) mode, aiming to obtain the 3D information of buildings from two different angles through a single rotation, and use the difference in geometric distortion to reconstruct the 3D structure of buildings. Specifically, the paper mainly solves the following problems: 1. **Low data collection efficiency**: Traditional multi - baseline or multi - angle SAR methods require multiple flights or data collection at different altitudes, resulting in complex and time - consuming data acquisition. The RSAR mode only needs one rotation to obtain building information from two different angles, greatly simplifying the data collection process. 2. **Anisotropic interference**: The anisotropic interference introduced by multi - angle observation will reduce the accuracy and clarity of 3D imaging. The RSAR mode improves the reliability and accuracy of data by observing from the same side of the building. 3. **High - precision 3D reconstruction**: By calculating the projection point offset in image pairs at different angles, the height information of buildings can be accurately restored. The paper proposes a matching method based on height assumptions, optimizes the matching path, avoids a large number of matrix calculations, and improves computational efficiency. ### Formula summary - **Signal model**: \[ s(t)=\exp\{j2\pi(f_c t + Kt^2)\}, \quad t\in[0, T_p] \] where \(t\) is the fast time, \(f_c\) is the center frequency, \(K\) is the signal modulation frequency, and \(T_p\) is the pulse width. - **Echo signal model**: \[ s_r(t,\tau)=\sigma_p\cdot s(t - \tau)\cdot\exp\left\{j2\pi K\tau^2\right\} \] where \(\sigma_p\) is the scattering coefficient of the target, and \(\tau\) is the signal delay time. - **Distance formula**: \[ R_p(\tau)=\sqrt{(x_p - X_a\cos(\theta))^2+(y_p - X_a\sin(\theta))^2+z_p^2} \] - **Relationship between height and projection geometry**: \[ \Delta\rho=\frac{\Delta h}{\tan(\alpha)} \] \[ \Delta r = 2\Delta\rho\cdot\sin\left(\frac{\theta_1+\theta_2}{2}\right) \] \[ \Delta h=\frac{\Delta r\cdot\tan(\alpha)}{2\sin\left(\frac{\theta_1+\theta_2}{2}\right)} \] Through these improvements, the RSAR mode can achieve more efficient and accurate 3D imaging of buildings, providing a new technical means for urban building health monitoring.

Innovative Rotating SAR Mode for 3D Imaging of Buildings

Three Dimension Airborne SAR Imaging of Rotational Target With Single Antenna and Performance Analysis

Three-Dimensional Structure Inversion of Buildings with Nonparametric Iterative Adaptive Approach Using SAR Tomography

Urban SAR Tomography With Z-Structure Constraint of Buildings

Airborne Circular Flight Array SAR 3D Imaging Algorithm of Buildings Based on Layered Phase Compensation in the Wavenumber Domain

High-Resolution and Wide-Swath 3D Imaging for Urban Areas Based on Distributed Spaceborne SAR

Three-Dimensional Stereo Reconstruction of Buildings Using Polarimetric SAR Images Acquired in Opposite Directions

Geometric constraints based 3D reconstruction method of tomographic SAR for buildings

Enhanced TomoSAR imaging method with complex least squares for 3D building reconstruction

3-D Tomographic Circular SAR Imaging of Targets Using Scattering Phase Correction

A Novel Phase Compensation Method for Urban 3D Reconstruction Using SAR Tomography

Reconstructing 2-D/3-D Building Shapes from Spaceborne Tomographic Synthetic Aperture Radar Data

Three-Dimensional High-Resolution Space-Borne ISAR Imaging With Compact Antenna Configuration for Large Rotational Angle

Radargrammetric 3D Imaging through Composite Registration Method Using Multi-Aspect Synthetic Aperture Radar Imagery

Automatic Reconstruction of Building Objects from Multiaspect Meter-Resolution Sar Images

Prior elevation range based tomographic SAR imaging for urban building

URBAN 3D RECONSTRUCTION OF VHR SAR IMAGES USING ITERATIVE OPTIMIZATION ALGORITHM AND LAYOVER FIXED-ORDER MODEL

Reconstruction of the 3D Stereo Buildings from Polarimetric SAR Images in Two Converse Flights

Information Retrieval and Reconstruction Based on High-Resolution SAR Observation over Urban Area

Synthetic Aperture Radar Three-dimensional Imaging——From TomoSAR and Array InSAR to Microwave Vision

Spatial Shift Phenomenon Compensation for TomoSAR Imaging Using High-Resolution TerraSAR-X Data